Loose wire in loom (with injector wiring) please help!!!

[philreed52]

As above, i replaced my injector seals and when stripping out i found a section of wire poked down through the inlet manifold, it was in the loom with the four injector connectors and cam pos sensor, havent got a clue where it came from!!

http://i218.photobucket.com/albums/cc244/philreed52/IMG_0261.jpg

its the one i have trailed across the inlet manifold, the other wire in the loom is the cam position sensor, which is connected....(ignore the one by my hand, found where that went, i think lol)

 

[philreed52]

 

[<tuffty/>]

If you mean the one lead across the inlet manifold then thats the knock sensor wiring... knock sensor 1 to be exact...

<tuffty/>

 

[philreed52]

cheers mate, now, where do i find the sensor its come from...

 

[philreed52]

as above, found the wiring disconnected, cant find the location of the sensor so i didnt wanna take off the mani if i dint need to?

 

[<tuffty/>]

To the right of the thermostat housing on the block

VWVortex.com - JETTA 1.8T 2001 knock Sensor.

<tuffty/>

 

[philreed52]

will investigate tomo cheers buddy