Jardo, what camera are you using and is it mounted to the headrest bars?
I promise I won't post 'that' pic like I did on FB ;P
<tuffty/>
Alan Jefferies is on Valley Road now
..4.8 must be nuts Paul, would love to get a go in that!
He's been in Plympton for years, but a lot of people dont rate him much a good friend had his Octavia Vrs remapped by him and ended up going back 3 times eventually getting the origional map restored. and was very unimpressed with his attitude and general lack of customer care.
....And yes Paul, would be epic. I've been out in Bumble with his old spec a couple of years back, is it comparable to that?
fkn jardo.....I'm not quite sure to be honest, it was 2 years ago at my first B5 RR day.
I'm worried about going on the rollers, what if it doesn't pull good figures and everybody laughs at me? I know this sounds stupid, but can Bill do 5/6 full throttle runs back to back with it first before doing the proper power run? Because it is a bit wet until it's had a caning for a couple of minutes.
It misfires too when building boost until it's hot, which Prawn tells me is it running lean. I don't really want to turn the boost down to make it run richer, I'd rather find another way around it lol!
I'm not quite sure to be honest, it was 2 years ago at my first B5 RR day.
I'm worried about going on the rollers, what if it doesn't pull good figures and everybody laughs at me? I know this sounds stupid, but can Bill do 5/6 full throttle runs back to back with it first before doing the proper power run? Because it is a bit wet until it's had a caning for a couple of minutes.
It misfires too when building boost until it's hot, which Prawn tells me is it running lean. I don't really want to turn the boost down to make it run richer, I'd rather find another way around it lol!
Bill will warm the engine properly before doing a run on any car mate... then you typically get 3 power runs unless you are paying for a diagnostics session...
<tuffty/>
I will probably take it out for a beasting, then let it sit on the rollers and have it's three runs so it is running right.
What can I do to help the running lean on build up? When I say "get hot" I mean, I don't give it ANY boost until it is at 90*. But I can drive it normally all day and go to put my foot down and it will misfire for the first couple of pulls but then after a couple of pulls it properly fly's. Do you want me to maybe do a couple of logs on it so you can see fueling?
Maybe worth having a diags session then mate... Bill can log shizzle and let you know whats what...
Bill can load the car off boost to get stuff hot if need be... its how he maps stuff anyway
<tuffty/>
I'm not quite sure to be honest, it was 2 years ago at my first B5 RR day.
It misfires too when building boost until it's hot, which Prawn tells me is it running lean.
No recall for the AGU or APY...
That would be Jardos boyfriend, George 'Spunky' Seamons with the silver A3 track car....
You wouldn't have dude, Georges car wsn't at ADI. Did you get any pics of me on track? identical to jardos but with an orange cage (and going much quicker )
Nice pics Warren, if you don't mind I'm going to cross post them into my build thread
If you'd rather I didn't then just drop me a PM