shizzie
Registered User
- Joined
- Jun 15, 2016
- Messages
- 5
- Reaction score
- 0
- Points
- 1
Hi I have upgraded headlights on my A3 8P 2010 1.4TFSI Sline to Bi Xenon DRL lights.
I bought adaptation loom from kufatec and was installed as per instructions
The wire have been taken to CCM
PIN 26 Black wire
PIN 48 Blue wire
PIN 49 Blue wire
PIN 44 Black wire
The issue is I have no DRL coming on when I switch to DRL I get error on dash, the LEDs lights come on dim when switch is on side lights however full lights are working fine with the flash.
Has any one had this issue what coding needs to be changed for DRLs to work?
Any help is appreciated.
Best Regards
Sent from my iPhone using Tapatalk
I bought adaptation loom from kufatec and was installed as per instructions
The wire have been taken to CCM
PIN 26 Black wire
PIN 48 Blue wire
PIN 49 Blue wire
PIN 44 Black wire
The issue is I have no DRL coming on when I switch to DRL I get error on dash, the LEDs lights come on dim when switch is on side lights however full lights are working fine with the flash.
Has any one had this issue what coding needs to be changed for DRLs to work?
Any help is appreciated.
Best Regards
Sent from my iPhone using Tapatalk
