Install oil pressure gauge in S3 8L?

[cstmn]

Hello anyone fitted oil press gauge on S3 AMK? If he can show photos. The size of the sensor is 1/8NPT

 

[MPH]

Hello anyone fitted oil press gauge on S3 AMK? If he can show photos. The size of the sensor is 1/8NPT

There's a spare connection on top of the oil filter housing to do this, just run it through to the cabin to where you intend to put the gauge.

Sent from Syknet Global Defence Network

 

[cstmn]

There's a spare connection on top of the oil filter housing to do this, just run it through to the cabin to where you intend to put the gauge.

Sent from Syknet Global Defence Network

Yeah but the size of the cap is M10x1 and the size on oil pressure sensor is 1/8 NPT ? Will the sensor itself fit only with a straight adapter M10x1 to 1/8NPT?

 

[MPH]

1.8T Oil Pressure Sender Install - Write-Up

>> PDF Version with Photos - Click Here << There has been some questions about this now and again, so I thought I'd finally post a little writeup of my oil pressure sender installation. The gauge I bought was a Marshall Pro Street II, full sweep electric stepper motor gauge. I got in on ebay...

www.audizine.com

 

[cstmn]

1.8T Oil Pressure Sender Install - Write-Up

>> PDF Version with Photos - Click Here << There has been some questions about this now and again, so I thought I'd finally post a little writeup of my oil pressure sender installation. The gauge I bought was a Marshall Pro Street II, full sweep electric stepper motor gauge. I got in on ebay...

www.audizine.com

This engine is not AMK/BAM/APY code. This is my sensor: 1/8NPT.

I read this post and this guy say the distance is too short to screw the sensor on top of the oil cooler....
https://wak-tt.com/mods/gauges/gauges2.htm
If someone did it to upload photos of how he mounted it.
Thanks in advance....