how to turn tick over up

[tdi-man]

any body know how to turn idle up ?

 

[mike foster]

any body know how to turn idle up ?

Yep - I did a write up about this some 6-9 months ago !

I'll see if I can find it !

EDIT - here it is :-

This is for version 908 :-
Ignition on - engine off

Select Engine controller 01
Select Measuring blocks 08
Select 'Go' in Group 1
Start Engine ( you may be able to start engine earlier but I don't )
Hit 'Turbo' button at top of page
Select 'Done'
Select Adaptation - 10
Change channel to 06 and hit 'Read'

First figure shows actual rpm
Stored value shows rpm as originally set ( mine is 840 )
New value will show same figure

Use up/down buttons to change revs and when happy press 'Test' to see if ok

If ok then hit 'Save' and close otherwise fiddle around with revs and test until happy.

 

[martinivw]

Yep - I did a write up about this some 6-9 months ago !

I'll see if I can find it !

EDIT - here it is :-

This is for version 908 :-
Ignition on - engine off

Select Engine controller 01
Select Measuring blocks 08
Select 'Go' in Group 1
Start Engine ( you may be able to start engine earlier but I don't )
Hit 'Turbo' button at top of page
Select 'Done'
Select Adaptation - 10
Change channel to 06 and hit 'Read'

First figure shows actual rpm
Stored value shows rpm as originally set ( mine is 840 )
New value will show same figure

Use up/down buttons to change revs and when happy press 'Test' to see if ok

If ok then hit 'Save' and close otherwise fiddle around with revs and test until happy.

If like me you are bothered with rough idle/tickover use mikes guide to turn revs DOWN,
yes that's right turn them down for a while I have been turning mine up (thanks Ewan)with little improvement, to my surprise I have just
turned rpm down to 800 rpm with INSTANT improvement ,
It has only been 10 mins so I guess time will tell

 

[_G_]

hang on a minute... i thought that.. when you start it up it revs about 1200 or so and then the revs settle at 800 anyway within a minute... so is there any danger in having them that low?

 

[mike foster]

hang on a minute... i thought that.. when you start it up it revs about 1200 or so and then the revs settle at 800 anyway within a minute... so is there any danger in having them that low?

No !

 

[cmgreen]

Is there an advantage having it lower than 900?

 

[TimWills28]

Done this today to cure judder on idle! Down to 800 no problems!!