help needed with Facelift conversion C7

[BIGA3T]

hello everyone.

i have a 63 plate audi S6 and i am wanting to do a facelift conversion.

i have purchased C7.5 facelift headlights (not matrix ones) obvs a facelift bumper too.

now the important bit. are the headlights a straight fit. meaning are the plugs the same or do i need adapters.

i know they will need coding. but can’t find anything online about the plugs.

many thanks

 

[NHN]

Nothings ever straight fit, got your pm, mobile atm will reply when back.

 

[B5NUT]

Unfortunately it's not that simple. You need a wiring harness adapter, then you need a new central electric module, then you will need all that coding and component protection removing, which needs to be done with a licensed version of ODIS so either the dealer or a third party. You may also need to update the can-gateway either firmware or replace it to support the headlights (Not 100%) sure on that one.

Kufatec sell some of the parts https://www.kufatec.com/en/audi/a6/a6-4g/?p=2&o=1&n=12&f=109

 

[BIGA3T]

Unfortunately it's not that simple. You need a wiring harness adapter, then you need a new central electric module, then you will need all that coding and component protection removing, which needs to be done with a licensed version of ODIS so either the dealer or a third party. You may also need to update the can-gateway either firmware or replace it to support the headlights (Not 100%) sure on that one.

Kufatec sell some of the parts https://www.kufatec.com/en/audi/a6/a6-4g/?p=2&o=1&n=12&f=109

thanks for the reply.

Yeah i knew it won’t be a straight fit. i just need someone who can do it for me, from wiring to the coding etc. i don’t want to mess about with electronics my self and F something up.

 

[BIGA3T]

Nothings ever straight fit, got your pm, mobile atm will reply when back.

thank you. please let me know you can book me in