Help identifying gearbox/propshaft part

Can anyone help identify this part highlighted? A part number would be ideal and any info on how this might be fitted would also be very helpful.

The issue is that aluminium housing is detaching from the rubber, causing vibrations.

Thanks in advance.

Edit: 6 speed, Quattro, 2.0 TFSI

20210413_091307.jpg



20210413_091131.jpg


20210413_091127.jpg
 

Frizzley

Registered User
Can anyone help identify this part highlighted? A part number would be ideal and any info on how this might be fitted would also be very helpful.

The issue is that aluminium housing is detaching from the rubber, causing vibrations.

Thanks in advance.

Edit: 6 speed, Quattro, 2.0 TFSI

View attachment 235414


View attachment 235415

View attachment 235416
U

You might be able to use this site to locate what you need

Have used it myself before
 
U

You might be able to use this site to locate what you need

Have used it myself before
Have used that before and it's pretty decent. But not having much experience with gearboxes and props means I'm a little blind on those exploded diagrams.

Will research all the same - nice one.
 

bobby singh

BSR
VCDS Map User
Gold Supporter
Is this the bracket holding the prop to the body of the car?


You can see the play in the vid of that particular part. Which is what the mechanics have identified.
Yep in the centre
Check my build thread out - I got a uprated bearing carrier from JXB performance
(yet to install)
 
Yep in the centre
Check my build thread out - I got a uprated bearing carrier from JXB performance
(yet to install)
Thanks Bobby - will certaibly check that out. Although I'd hope/expect the mechs to have dismissed that as a cause through their inspection.

Any idea what that part might be, BTW....part 8 on this image perhaps?https://audi.7zap.com/en/rdw/audi+a4+avant/a4/2013-736/4/409-409080/
SmartSelect_20210413-223753_Samsung Internet.jpg
 
Its a balancer
Hey Bobby,

i've picked up the part from Audi, images below. Any idea how this fits to the gearbox and propshaft? The part is splined at both ends and on the gearbox side there is a sharp narrow groove, perhaps for a retaining clip? Also not sure how the fitted one would be removed.

Grateful if you can share any insight - thanks,

20210422_080952.jpg 20210422_081000.jpg 20210422_081006.jpg 20210422_081035.jpg 20210422_081055.jpg
 

Attachments

  • 20210422_081021.jpg
    20210422_081021.jpg
    1.1 MB · Views: 8
  • 20210422_081027.jpg
    20210422_081027.jpg
    560.4 KB · Views: 10
  • 20210422_081042.jpg
    20210422_081042.jpg
    569.7 KB · Views: 10
  • 20210422_081047.jpg
    20210422_081047.jpg
    387.9 KB · Views: 8
Top