After eventually getting my retrofitted heated seats working i have noticed the heater control for the drivers seat actually controls the passenger seat and passenger control heats the drivers seat.
A kufatec wiring loom was used and i am thinking it is pre-wired for a LH drive car ie Germany?
I know some people have done this mod and any help will be very welcome i am wondering if two pins need to be swapped round on the back of the climate/heater control , but the Kufatec instructions are pretty useless.
The plugs to the seats cant be swapped over because of the length of the cables.
Thanks all.
A kufatec wiring loom was used and i am thinking it is pre-wired for a LH drive car ie Germany?
I know some people have done this mod and any help will be very welcome i am wondering if two pins need to be swapped round on the back of the climate/heater control , but the Kufatec instructions are pretty useless.
The plugs to the seats cant be swapped over because of the length of the cables.
Thanks all.
