the_muzza
Registered User
- Joined
- Sep 5, 2016
- Messages
- 119
- Reaction score
- 63
Just fitted a set of A5 rotors on my A4. For those that don't know the standard A4 rotors that I had on before were 8.5J ET43 with a 255 35 19 tyre. The A5 rotors are 9J ET33 with the same size tyre so roughly 16.4mm extra poke from the arch. This is a pretty aggressive setup for the fronts as most people run a 10 or 12mm spacer up front. They stick out ever so slightly from the front arch.
I haven't lowered my car at all, it's got the sport springs as standard on the S-Line quattro.
There is no rubbing at all so far, but I'm looking to get the Bilstein P12 kit in future so I might have to go down to a 245 section tyre.
Really sets the car off I think as the A5 rotors have a more concave design and look better.
Before shot
I haven't lowered my car at all, it's got the sport springs as standard on the S-Line quattro.
There is no rubbing at all so far, but I'm looking to get the Bilstein P12 kit in future so I might have to go down to a 245 section tyre.
Really sets the car off I think as the A5 rotors have a more concave design and look better.
Before shot
Last edited: