Last month had a problem with epc light keep coming on and struggle to start so replaced speed sensor and all was fine till today came to start the car and again struggled to start and epc light on so code read and it came up with no signal again any help please
Engine speed sensor no signal problem
- Thread starter Martynhill
- Start date
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
http://wiki.ross-tech.com/wiki/index.php/16706/P0322/000802
16706/P0322/000802 - Engine Speed Sensor (G28): No Signal
Possible Symptoms
I assume you replaced the crank sensor (whats its more widely known as) with a new part? pattern part or an OE one?
Pattern parts are generally rubbish (GSF/ECP type ones)... OE always work assuming its not anything to do with the wiring which is another possibility... I would replace with OE sensor if not already and/or try rewiring back to the ECU... you will need to use screened cable to rewire this sensor
<tuffty/>
16706/P0322/000802 - Engine Speed Sensor (G28): No Signal
Possible Symptoms
- Engine shuts off
- Engine doesn't start
- Speedometer inoperative
- Glow Plug Indicator Lamp (K29) flashes
- Engine Speed Sensor (G28) loose
- Engine Speed Sensor (G28) faulty
- Check Engine Speed Sensor (G28)
- The Engine Speed Sensor (G28) is also used as a reference sensor for the crankshaft position.
I assume you replaced the crank sensor (whats its more widely known as) with a new part? pattern part or an OE one?
Pattern parts are generally rubbish (GSF/ECP type ones)... OE always work assuming its not anything to do with the wiring which is another possibility... I would replace with OE sensor if not already and/or try rewiring back to the ECU... you will need to use screened cable to rewire this sensor
<tuffty/>
