silent_wolf
Registered User
Hi guys,
I scanned my friends car yesterday and it came up with a number of engine error codes, some of them look quite worrying after checking the ross tech wiki. Its a 2006/2007 a3 2.0 fsi, I dont know the finer details about them as I have an 8l s3. He did have a unichip installed, not sure if its causing any of these problems, any ideas guys?
Address 01: Engine Labels: None
Part No SW: 06F 906 056 JB HW: 06F 906 056 FD
Component: MED9.5.10 00 0848
Revision: 6AH03--- Serial number: AUX7Z0G8FNA0ML
Coding: 0000072
Shop #: WSC 06314 000 00000
VCID: 72EB3C436D5AFA8E927-8027
5 Faults Found:
000022 - Bank 1: CMP Sensor (G40) / Engine Speed Sensor (G28)
P0016 - 002 - Incorrect Correlation - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 0
Fault Frequency: 219
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1520 /min
Load: 47.4 %
Speed: 11.0 km/h
Temperature: 42.0°C
008825 - Leak in Air Intake System
P2279 - 008 - - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 0
Fault Frequency: 58
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1080 /min
Load: 45.9 %
Speed: 0.0 km/h
Temperature: 33.0°C
000808 - Knock Sensor 1 (G61)
P0328 - 001 - Signal too High - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 254
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 2600 /min
Load: 58.4 %
Speed: 86.0 km/h
Temperature: 88.0°C
008567 - Bank 1; System Too Lean off Idle
P2177 - 001 - - MIL ON
Freeze Frame:
Fault Status: 11100001
Fault Priority: 0
Fault Frequency: 31
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 2880 /min
Load: 16.5 %
Speed: 95.0 km/h
Temperature: 92.0°C
000819 - Knock Sensor 2 (G66)
P0333 - 001 - Signal too High - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 85
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 3800 /min
Load: 54.9 %
Speed: 126.0 km/h
Temperature: 90.0°C
I scanned my friends car yesterday and it came up with a number of engine error codes, some of them look quite worrying after checking the ross tech wiki. Its a 2006/2007 a3 2.0 fsi, I dont know the finer details about them as I have an 8l s3. He did have a unichip installed, not sure if its causing any of these problems, any ideas guys?
Address 01: Engine Labels: None
Part No SW: 06F 906 056 JB HW: 06F 906 056 FD
Component: MED9.5.10 00 0848
Revision: 6AH03--- Serial number: AUX7Z0G8FNA0ML
Coding: 0000072
Shop #: WSC 06314 000 00000
VCID: 72EB3C436D5AFA8E927-8027
5 Faults Found:
000022 - Bank 1: CMP Sensor (G40) / Engine Speed Sensor (G28)
P0016 - 002 - Incorrect Correlation - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 0
Fault Frequency: 219
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1520 /min
Load: 47.4 %
Speed: 11.0 km/h
Temperature: 42.0°C
008825 - Leak in Air Intake System
P2279 - 008 - - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 0
Fault Frequency: 58
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1080 /min
Load: 45.9 %
Speed: 0.0 km/h
Temperature: 33.0°C
000808 - Knock Sensor 1 (G61)
P0328 - 001 - Signal too High - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 254
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 2600 /min
Load: 58.4 %
Speed: 86.0 km/h
Temperature: 88.0°C
008567 - Bank 1; System Too Lean off Idle
P2177 - 001 - - MIL ON
Freeze Frame:
Fault Status: 11100001
Fault Priority: 0
Fault Frequency: 31
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 2880 /min
Load: 16.5 %
Speed: 95.0 km/h
Temperature: 92.0°C
000819 - Knock Sensor 2 (G66)
P0333 - 001 - Signal too High - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 85
Reset counter: 255
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 3800 /min
Load: 54.9 %
Speed: 126.0 km/h
Temperature: 90.0°C
