engine cover mod

[weebelly]

hi guys a bought an induction kit are they a way to modifie the engine cover to sit in so it looks good or sould i just leave it

was wanting it to look like this think its a members in here

 

[paddy]

Do you speak English ?

 

[CrypticS3]

You can easily modify it to give the same result as the pic but it will not longer be functional so you will need to source another one to modify or will have to source one later on if you ever want to put back to standard. Easiest and best looking is to get the TTS engine cover.

 

[weebelly]

Yah bud al have a look in scrapyard see if a see any thanks

 

[ch1z64]

you can but thee tts co er off of ebay at a cost off £110 +10 p&p plus you get the 3 bolts you need to mount it.
i think if you ask on here there is a member who sells the part with everything too and this is what you could have

 

[weebelly]

Aww thanks ch1z64 aww and sorry to see u support Celtic lol

 

[Darren92]

you can but thee tts co er off of ebay at a cost off £110 +10 p&p plus you get the 3 bolts you need to mount it.
i think if you ask on here there is a member who sells the part with everything too and this is what you could have

Can't buy the mounts new anymore.

Mike I believe makes his own now https://www.facebook.com/mjr901parts/

 

[weebelly]

Thanks Darren a was think of getting a spare one and cut it down

 

[ch1z64]

you will easily pick up a old standard cover on here for around £50 or more but then you will be £25 for bolts and your time to mod it

 

[weebelly]

Yah bud al wait to see what happens a think it looks better with the cover on a bought an evoms induction kit think it's off one off the guys from ebay tho sure I buy temp tape for the evoms

 

[ch1z64]

no problem let us know how you get on cheers

 

[weebelly]

Would do bud cheers