Eibach Pro with Spacers

[AJ Jacob]

Hi Guys,

Anyone on here with the Eibach Pro or a 10 to 15mm drop with spacers. I have 15mm spacers all around current on stock setup.

Would there be a problem with me installing springs? like rubbing etc?

Would appreciate some advice.

 

[-Ju-]

I had the Eibach pro's on but with 10mm spacers before I changed to the MSS kit, no rubbing whatsoever.
You bought the springs yet?

 

[AJ Jacob]

Have not ordered them yet, but been told they are the best for better comfort along with improved handling than stock springs.

 

[-Ju-]

They are a nice spring and better than the H&R's I had on previously. It was also a nice drop, slightly higher than the H&R' but still low enough to look nice. I have the measurements if you want to compare from oem.
They are also still in my garage

Sent from my Note 8 using Tapatalk

 

[AJ Jacob]

They are a nice spring and better than the H&R's I had on previously. It was also a nice drop, slightly higher than the H&R' but still low enough to look nice. I have the measurements if you want to compare from oem.
They are also still in my garage

Sent from my Note 8 using Tapatalk

Haha typical! yeah will be great if you let me know the measurements. Another sale thread?

 

[-Ju-]

Roughly 655mm from the floor to wheel arch all round.
If they're good for you, you can have them for £90 delivered

 

[-Ju-]

This is on the Eibach Pro's

 

[Timi8888]

I have 15mm all round with vwr springs. No scrubbing.