Eibach Pro with Spacers

Hi Guys,

Anyone on here with the Eibach Pro or a 10 to 15mm drop with spacers. I have 15mm spacers all around current on stock setup.

Would there be a problem with me installing springs? like rubbing etc?

Would appreciate some advice.
 

-Ju-

Well-Known Member
VCDS Map User
I had the Eibach pro's on but with 10mm spacers before I changed to the MSS kit, no rubbing whatsoever.
You bought the springs yet?
 
Have not ordered them yet, but been told they are the best for better comfort along with improved handling than stock springs.
 

-Ju-

Well-Known Member
VCDS Map User
They are a nice spring and better than the H&R's I had on previously. It was also a nice drop, slightly higher than the H&R' but still low enough to look nice. I have the measurements if you want to compare from oem.
They are also still in my garage:)

Sent from my Note 8 using Tapatalk
 
They are a nice spring and better than the H&R's I had on previously. It was also a nice drop, slightly higher than the H&R' but still low enough to look nice. I have the measurements if you want to compare from oem.
They are also still in my garage

Sent from my Note 8 using Tapatalk

Haha typical! yeah will be great if you let me know the measurements. Another sale thread?
 

-Ju-

Well-Known Member
VCDS Map User
Roughly 655mm from the floor to wheel arch all round.
If they're good for you, you can have them for £90 delivered
 

-Ju-

Well-Known Member
VCDS Map User
20180830_155220-3024x2268.jpg

This is on the Eibach Pro's
 

Timi8888

Registered User
I have 15mm all round with vwr springs. No scrubbing.
 
Top