Got my new (to me) intake manifold in today. Cleaned it up and started figuring out how things go together. It came a little grimy but it cleaned up fine.
I need to figure out how the bottom coal and N80 lines get hooked up. Doesn't make any sense to me at all without eliminating it all together.
Had to shave the edges of the fuel rail to get it to fit. Nothing a Dremel couldn't take care of.
Last thing is figuring out the gasket, particularly the one at the throttle body. Doesn't seem to fit perfectly in the groove. And the gaskets on the head side are kept in place with some gasket maker or silicone by the previous owner. He said they would fall out and couldn't get them to stay in long enough to get the manifold on but didn't effect performance.
Not going to install until we get the fueling figured out. Don't want to introduce something new right now when we still have kinks to work out.
Sent from my ONEPLUS A6013 using Tapatalk