Door handle trims


Registered User
My drivers door handle trim is a bit loose and rattly - have had a look to try and see if there's anything that could be tightened but i'm not sure how it even attaches - anyone know?

20160320_192829 by wjheenan, on Flickr


Well-Known Member
VCDS Map User
This is similar to how I did mine CLICKY

As this if for a LHD car the direction to slide it out will be the opposite direction.

Here's a basic picture also.....trying to find the how to I used as it was simple to follow.



Well-Known Member
VCDS Map User
I used a little piece of doubled sided moulding tape on these raised bits in case I needed to remove them for any reason at a later raised it a little but over time it's settled down but the main thing is no more rattling. Doesn't need to be strong as the plastic parts have just worn down a little.


I'm Just Rob.

Moderating or something,
Staff member
VCDS Map User
Gold Supporter
had the same irrating problem with my drivers side , rattled from the day I got the car until a few months ago, as already mentioned took of handle applied some super sticky double sided tape and it has been silent ever since, not a peep from it.

nice easy and effective fix, oh and cheap too which is very unuasual for most audi