1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Dismiss Notice

Dipstick part number?

rasA4 Apr 26, 2018

  1. rasA4

    rasA4 Four Rings Mafia Specialist

    3,780
    306
    83
    Has anyone fitted a dipstick to a B9?
    I know I can see the oil level from inside the car. However I want to physically see it also I want to see the colour of it.
    Would be grateful for a part number I’ve asked Crewe Audi they don’t have a part listed and was advised to ask on here.
     
  2. Avatar

    snack-media
    Advertisement


  3. BKing

    BKing Registered User

    47
    25
    18
    Don't know the part number but I do know from conversations with my mechanic about these things that you will find they'll have a part number for exactly the same dip stick on the same engine for a different model.....
     
    rasA4 likes this.
  4. cuke2u

    cuke2u Well-Known Member

    13,036
    5,277
    113
    rasA4 likes this.
  5. Sandra

    Sandra Administrator Staff Member Administrator Platinum Supporter Audi Main Dealer

    32,679
    15,009
    113
    I’m sure @jdp1962 jeff got one for his car. Iirc his is a B8.5
     
    rasA4 and cuke2u like this.
  6. rasA4

    rasA4 Four Rings Mafia Specialist

    3,780
    306
    83
    Thanks his is a big V8 I believe not a little 2.0 maybe it’s the same
     
  7. rasA4

    rasA4 Four Rings Mafia Specialist

    3,780
    306
    83
  8. jdp1962

    jdp1962 Grumpy Old Man

    9,796
    4,361
    113
    V6 but still obviously a different engine from yours @rasA4 . I seem to recall a thread in the B8 section that identified a part number for the 2.0 litre. I’ll have a dig around.
     
  9. jdp1962

    jdp1962 Grumpy Old Man

    9,796
    4,361
    113
    @rasA4, I think part number 06J115611L might work. I found it in this thread, see post 13 by @Nilz
     
    Nilz, cuke2u, Sandra and 1 other person like this.
  10. rasA4

    rasA4 Four Rings Mafia Specialist

    3,780
    306
    83
    Thanks I think this the same apparently it touches the bonnet on the B9?

     
  11. jdp1962

    jdp1962 Grumpy Old Man

    9,796
    4,361
    113
    Good video, and a neat solution. The alternative I guess would be not leave it in place but just use it when needed.
     
  12. Avatar

    snack-media
    Advertisement


  13. rasA4

    rasA4 Four Rings Mafia Specialist

    3,780
    306
    83
    yeah i guess i could just use it when i want to just replace the plastic cap normally, something to think about ill wait for Nilz to come back
     
  14. Nilz

    Nilz Defo worth the wait :)

    11,364
    915
    113
    Mine is in place and stays there, it litteraly skims the under cover of the bonnet.
     
    Sandra likes this.

Share This Page

Do Not Sell My Personal Information