"Digzz" Work In Progress :

Hi
Cheers for getting back to me. The problem i am having is the seats for the a5 seem to be slightly taller than the a3 so the bottom of the seat does not fit. One of the child seat brackets is in the way. I was wondering if you altered any of the fixings or seat size or did yours go straight on. Also how did the heated seats come along. I have just got cable from kauftec but need some one to implement the cabling for the seats at the same time i need fog lights installed. I have spoke to someone on the forum who may do it for me. Are you saying that the rear seats fitted straight away, nothing needed to be altered.cheers mate

I had to saw off the baby seat hooks.
 
Can you give some info about the side fenders/wings. Because there is the difference not only because there is no blinkers, but they have something like U- shaped brackets to attach above the wheel, and with them it does not fit straight, it stands like lifted because of this U-brackets. Do you have some pictures or else how to manage with this because I'm dealing with the conversation right now.
It is the area under these holes that has these U-brackets:
Mu5uKFD.jpg
 
Conversion Finish :yahoo: ....but not Mod's :happy:....

My Conversion should of took 10 days to do as they stated but..it...Ended up being nearly 4 weeks .......with the Workers at the work shop being very lazy and the UK having too many bank holidays in April/May.....

Here's a low down in the parts Needed :

Prices going to be added soon...

Ordered New from Audi :

8P0 821 469 - Wing Bracket Rear QTY:2
8P0 821 467 - Wing Bracket Center QTY:2
8P0 821 471 - Wing Bracket Front QTY:2
8P0 823 301 B - Bonnet Lid Hinge -Left
8P0 823 302 B - Bonnet Lid Hinge -Right
8P0 821 171 G - Wheel Housing Liner , Plastic -Left
8P0 821 172 G - Wheel Housing Liner , Plastic -Right
8P2 823 531 G - Lid Lock Cable
8P0 807 183 A - Front Bumper Guide
8P0 807 184 A - Front Bumper Guide
8P0 807 863 A -Securing Strip
8P0 807 864 A -Securing Strip
8P0 823 509 H Lid Lock with Micro-switch
8P0 805 588 L -Lock Carrier with mounting for coolant radiator - Comes with headlight sockets

MY11 Darker Tint Rear Lights:
8P3 945 095C
8P3 945 096C

Xenon Adapter Cable = 63.28 Euro ordered at : KUFATEC GmbH & Co. KG for converting halogen to xenon


Parts I sourced from Ebay These prices vary .....


Bonnet 2009-2011 Paid=£80
Normal Front Bumper with Grill 2009-2011 Paid=£100
Left Wing 2009-2011 Paid= £40
Right Wing 2009-2011 Paid= £90
Side Mirrors with indicates 2009-2011= £134 for both
S3 Rear Bump for Parking Sensors 2007-2011= £215
Fog Lights 2009-2011 = £28.99
Fog Light Surround 2009-2011 = £20
S3 Roof Spoiler Any 8P = £74.99
CE K Module =£165 Installed : Thanks To RS :sm4:
Door J Module = £100 - Not installed as of yet...Still need help Re-pining

Some of these ebay Items where collected by my self and some where delivered.

Currently I'm having problems with Rear Fog Light and Reverse Light Appearing on the DIS Dash ....Stating that there is something wrong with the lights....but this might be a coding issue I hope....:unsure: As I've just installed the K module from a A module.

I'm going to install the Door Modules next week or so hopefully....having no indicates on the side is really bugging me now. If any body knows how to re-pin your help would be appreciated.

I also got my tints done yesterday also........

Just a little peak of photos i've taken with my iphone 4 ..........My next Mod is alloys ...as some of u might know..I'm looking for REP's in 19"'s..:happy:

img1327f.jpg

img1325gm.jpg
Long shot that you’ll see this but i’m doing this conversion at the moment and i’m stuck at the CE module, did you only replace that module? i already have the door modules but there is also a gateway module behind the glovebox, not sure if that needs to be changed aswell?

Thank you