1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Dismiss Notice

Cruise control stalk

Conza Jan 28, 2015

  1. Conza

    Conza South East

    121
    20
    18
    Right I fitted my brand new cruise control stalk I got from tps using my reg and I'm having a problem with the main beam
    It works just when u push it foward it don't stay there
    Is this normal or is my stalk broke as I now have main beam flash thing when I push and pull the stalk :/

    Any help will be appreciated as it my new genuine stalk is broke tps can have it back
     
  2. Avatar

    snack-media
    Advertisement


  3. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    31,752
    2,324
    113
    Wrong talk mate, take my word for it.
     
    Sayam likes this.
  4. Conza

    Conza South East

    121
    20
    18
    :( how annoying is that :( and I gave tps my reg to get the correct kit :(
     
  5. Adam Wilson

    Adam Wilson Registered User

    95
    23
    8
    Reg isn't always 100% accurate, but TPS have direct access to the OE parts database so it's 'probably' the right one. Sounds like its broke though!
     
  6. Conza

    Conza South East

    121
    20
    18
    I dunno what to do :( as dunno if it broke or wrong :/ part number on kit I fitted is 8p0 054 690 B which is right compared to all the threads but no one mentions the b?

    Plus on the booklet inside it metion 2010 onwards on cover :/
     

    Attached Files:

  7. Ceylon

    Ceylon Registered User

    55
    15
    8
    Can you code the momentary press on these? I certainly have seen the option on my CECM! The later cars stalks do work as per the one you've bought. I tap the stalk forward, highbeam comes on and the stalk returns to the centre position.
     
  8. Sayam

    Sayam Well-Known Member VCDS Map User

    2,799
    664
    113
    When you pull the indicator stalk towards you, the main beam should stay on for the duration you pull the stalk

    When you push the indicator stalk away from you, the main beam comes on and the stalk returns to the centre position. The main beam stays on

    With the main beam still on and the indicator stalk in the centre position, you pull the stalk towards you. The main beam switches off and the stalk returns to the centre

    That is how mines works. My cruise was retrofitted by @NHN
     
  9. Conza

    Conza South East

    121
    20
    18
    not sure on coding it in but got another stalk coming tomorrow from tps so must be wrong one :/
     

Share This Page

Do Not Sell My Personal Information