control module fault
- Thread starter tdi-man
- Start date
- Joined
- Jul 8, 2008
- Messages
- 9,420
- Reaction score
- 641
- Points
- 113
best i can do as i dont know if its in radio engine etc
00003 - Control Module: Defective
Possible Causes
00003 - Control Module: No or Incorrect Basic Setting / Adaptation
Possible Causes
00003 - Control Module: Defective
Possible Causes
- Control Module faulty
- Control Module Software Issue
- Check Control Module
- Check for Control Module Software Update
- Replace Control Module
- When found in Radio OR Radio Navigation System, check Measuring Value Block (MVB) 025.1 for Details.
- Measuring Value Block 025.1 (MVB) may not be supported by all Radios OR Radio Navigation Systems.
00003 - Control Module: No or Incorrect Basic Setting / Adaptation
Possible Causes
- Basic Setting(s) not performed
- Perform Basic Setting(s)
- When found in Control Head / Multi Media Interface (MMI), check Adaptation Channel 012 (Telephone Type) for Plausibility.
- Details for Audi A6 (4F): Multi Media Interface (MMI)
- Details for Audi A8 (4E): Multi Media Interface (MMI)
- Details for Audi Q7 (4L): Multi Media Interface (MMI)
- When found in Audi A3/S3 (8P): Instrument Cluster:
- Check/Perform Instrument Cluster Service Interval Settings (Adaptation Channels 42, 43, 44, 45 and 49)
- When found in Brake Electronics (MK60EC1):
- Replacing the Brake Electronics Control Module (J104) but keeping the (old) Hydraulics Unit will result in the Intake and Disconnecting Valves not being synchronized. A Basic Setting for the Intake/Disconnecting Valves will solve this problem.
