robotplant
Registered User
Just completed today a front complete control arm replacement with solid track rod ends on my b6 quattro. I purchased the Meyle Hd kit from Allgerman parts in Leeds Must say very impressed with the service you get with Jason and would deal with again.
I had a a couple of arms showing signs of wear and tear and what with 150 thou on the old girl thought it time to do the lot in one go. The Meyle HD set comes with a 4 year warranty and was in line with my plans of keeping the b6 for another 100 thou so thought it worth doing. Had the car lazer relined as well today and must say has made a good difference.
For anyone interested I had some all mighty struggles to get the old set off. The oxy/cet torch and plasma gun were needed to heat and cut some rusted bolts away. The job took me 8 hours in total from start to finish. I even had the benefit of a car lift and the use of a heavy lump hammer too, the arms just didn't want to depart to easy!
I have noticed Jason sells the rear refresh kit for the rear end of the quattro. My plan is to change the back end bushes arms next year as there ok at the moment. Has anyone done this job I would appreciate any advice pics etc as to how to do the job. It looks to me as if the rear springs and sub frame need to be taken off so as to remove the bolts on the front rear bushes as the tank is in the way? Appreciate any help in advance.
John
I had a a couple of arms showing signs of wear and tear and what with 150 thou on the old girl thought it time to do the lot in one go. The Meyle HD set comes with a 4 year warranty and was in line with my plans of keeping the b6 for another 100 thou so thought it worth doing. Had the car lazer relined as well today and must say has made a good difference.
For anyone interested I had some all mighty struggles to get the old set off. The oxy/cet torch and plasma gun were needed to heat and cut some rusted bolts away. The job took me 8 hours in total from start to finish. I even had the benefit of a car lift and the use of a heavy lump hammer too, the arms just didn't want to depart to easy!
I have noticed Jason sells the rear refresh kit for the rear end of the quattro. My plan is to change the back end bushes arms next year as there ok at the moment. Has anyone done this job I would appreciate any advice pics etc as to how to do the job. It looks to me as if the rear springs and sub frame need to be taken off so as to remove the bolts on the front rear bushes as the tank is in the way? Appreciate any help in advance.
John