Yes mate I saw it on fb. Looks good with all the new gauges on it. I'm looking forward to getting this installed.
After all the messing about with LED's I stumbled on a video of the MFA fitted to an S4 cluster which is the same illumination setup as the S3... actually doesn't look too bad...
<tuffty/>
After all the messing about with LED's I stumbled on a video of the MFA fitted to an S4 cluster which is the same illumination setup as the S3... actually doesn't look too bad...
<tuffty/>
No movement or updates yet but some sets look like they're already shipping
Will install the new firmware in a few and link a videoWhat’s new Ian?
Sent from my iPhone using Tapatalk
Useful reference...
https://workshop-manuals.com/audi/a...at_multi-pin_connectors_at_dash_panel_insert/
<tuffty/>
Does anyone have access to the wiring diagrams for the 8L S3 instrument cluster plugs? And for the mk 20 abs unit plug?
Thanks that helps, so blue plug pin 32 is esp/tcs
I have s3 clocks back in mine so I could compare with the a6 ones and I needed to do the basic setting of my steering angle sensor since I changed it.
When I open the bonnet on my s3 and on my pd130 a3 neither are showing it open in the dis screen but the doors and bootlid show when opened, could someone check if the dis should display open bonnet?
Have you received your batch yet do I need to be sending my cluster over anytime soon need to get my **** in gear and get the wiring installed for the mfsw,mine has to be the longest ever mfsw install ha
I think I fitted my mfsw in like June last year people have done full restoration in the time it’s taken me to do this haha
I’m in no rush just a thought
I’m in no rush just a thought
What puts me off doing it is everytime I go out to the car I’ve got to climb through the boot,for some strange reason the outside door handle stoped working after I parked it up hopefully get a few jobs done on it tomorrow door handle being one of them
The guides been a life saver couldn’t of done it without it, I’ve done most of it just have to connect the wires to slip ring and connect to the power and whilst it all out run a gala wire for the sat nav that I never done then fit the rear camera setup and get that working
Where have you mounted it Warren? I was thinking of doing something similar by removing one of the electric boot opening switches which has failed.
Sent from my iPhone using Tapatalk
I have one but not fussed about getting another before I drill the boot as it was only a few quid, you got a link?
Looks smart, I have seen the LED number plate light cameras available for the 8P, nice to see you’ve got one working on the 8L. I might see how difficult it’ll be to mount one in place of my failed boot switch. So it’s slight more central, but with the option to adjust it is a big bonus cheers mate
Sent from my iPhone using Tapatalk
Nearly...all buttoned up now @<tuffty/> ?