Coding

[Zain Zeeshan]

just put a new ballast in an S3 is there any way to code it in through OBDeleven?

 

[Zain Zeeshan]

just put a new ballast in an S3 is there any way to code it in through OBDeleven?

It’s coming with this fault

Sent from my iPhone using Tapatalk

 

[larbel]

There's two steps, you'll need to do "Basic headlamp setting" followed by "Acknowledge basic setting" or you'll get that error.

 

[Zain Zeeshan]

There's two steps, you'll need to do "Basic headlamp setting" followed by "Acknowledge basic setting" or you'll get that error.

Do you know where acknowledge basic settings is
And is that in the central electric module


Sent from my iPhone using Tapatalk

 

[larbel]

You should see the once you click on basic settings in module 55 Headlight Regulation.

 

[Zain Zeeshan]

You should see the once you click on basic settings in module 55 Headlight Regulation.

I’ll give that a go but I don’t think I have 55 headlight regulation
But this is a brand new ballast that’s never been coded before will this still work?


Sent from my iPhone using Tapatalk

 

[larbel]

Hmmm... Do you have LED or Xenon? If LED, you SHOULD have module 55, and don't think there's any coding for the ballast, only basic settings...

 

[Zain Zeeshan]

Hmmm... Do you have LED or Xenon? If LED, you SHOULD have module 55, and don't think there's any coding for the ballast, only basic settings...

I’ll give it a go and let you know what happens


Sent from my iPhone using Tapatalk

 

[Zain Zeeshan]

You should see the once you click on basic settings in module 55 Headlight Regulation.

There’s no 55 control module on my car only these modules

Sent from my iPhone using Tapatalk

 

[larbel]

Oops... Try 4B Multifunction Module. But howcome you have so many faults????

 

[Zain Zeeshan]

Oops... Try 4B Multifunction Module. But howcome you have so many faults????

What would I alter in that module
I just brought it after it was involved in an accident


Sent from my iPhone using Tapatalk

 

[larbel]

Should be same basic setting follow by acknowledge basic setting

 

[Zain Zeeshan]

Should be same basic setting follow by acknowledge basic setting

The cars parked at the garage so won’t be able to do it just now
Is there any other modules I should give a go
I know when I go to “right light 2” (last control module) I don’t have an option for basic settings but that’s coming up with 2 fault codes


Sent from my iPhone using Tapatalk

 

[larbel]

Depends on the fault code... but basic setting is for self leveling mostly and not the light itself.