Coding High Beam Assist

MELenium

Registered User
Hi
Is it possible to code the High Beam Assist using vcds ? I have the rain sensor camera on my windscreen of my 2019 A1.
 

1Rockape

Registered User
Not with the rain sensor . You need either the front driver assist camera in the windscreen or a mirror with the camera on the front

Sent from my SM-G973F using Tapatalk
 

MELenium

Registered User
Hi 1Rockape
Thank you for the reply, I do have driver assist camera as it has road sign and pedestrian recognition, lane departure warning, pre sense front and light and rain sensors. Does this mean it is possible now?
 

1Rockape

Registered User
Yes . You will need a coding device . Vcds obdeleven ect and code the a5 module and adaptions in 09

Sent from my SM-G973F using Tapatalk
 

1Rockape

Registered User
Ive got a record of my a3 coding with a 5q camera . What is your camera part number and coding

Sent from my SM-G973F using Tapatalk
 

MELenium

Registered User
Hi 1Rockape
How would I get the camera part number and coding, assume I would need to look at my vcds for this
 

1Rockape

Registered User
Yes do a autoscan it will bring up the part numbers and codings for your modules. Djalix has done a very good guide on here somewhere re vcds .

Sent from my SM-G973F using Tapatalk
 

MELenium

Registered User
Hi 1Rockape
Is this the information that you need

Address 09: Cent. Elect. (J519) Labels:. 5Q0-937-08X-V2.clb
Part No SW: 5Q0 937 084 DD HW: 5Q0 937 084 CG
Component: BCM MQBAB H H38 0273
Serial number: 01001910302795
Coding: 000000000000000000000000000000000000000000000000000000000000
Shop #: WSC 00049 770 00149
ASAM Dataset: EV_BCMMQB 019001
ROD: EV_BCMBOSCH_019_VW27.rod
VCID: 7DA7F27CCD79DDC3184-8028
Rain/Light Recognition Sensor:
Subsystem 1 - Part No SW: 81A 955 559 A HW: 81A 955 559
Component: G397_RLS H06 0002
Serial number: 20222057X81A955559A0
Coding: 80004D
 

MELenium

Registered User
Hi 1Rockape
This should be it

Address A5: Frt Sens. Drv. Assist (R242) Labels:| 3Q0-980-65X-A5.clb
Part No SW: 3Q0 980 654 M HW: 3Q0 980 654 A
Component: MQB_B_MFK H09 0451
Serial number: 12041915P10640
Coding: 0402070000000401000200448156440084000E20000000
Shop #: WSC 00847 210 00000
ASAM Dataset: EV_MFKBoschMQBB 002041
ROD: EV_MFKBoschMQBB_002.rod
VCID: 41DF4E8CF10179233CC-8014
No fault code found.
 

1Rockape

Registered User
Its a 3q camera mine was a 5q camera . The adaptions are the same i think.but codings are different . You dhould head over to the vw golf mk 7 and 7.5 they have the same camera as ive seen threads on there also the polo ect. Youll get all the info there mate

Sent from my SM-G973F using Tapatalk
 

MELenium

Registered User
Hi 1Rockape
On page 15 of the site you sent me, does the coding look similar to what you did with your A3?
 

1Rockape

Registered User
The 5q camera only has 17 bytes where as the 3q camera has 3 to 4 more
Have you had a go in the long coding , im sure theres on a couple to change .1 to turn on hba and the other for light type . I assume you have non matrix led ?

Sent from my SM-G973F using Tapatalk
 

1Rockape

Registered User
Also check out the britskoda forum . They habe the 3q camera . Failing that i have a number for a guy who can do remotely. Where are you based ?

Sent from my SM-G973F using Tapatalk
 

MELenium

Registered User
Hi 1Rockape
I haven't tried anything yet and I have the led lights. I'll have a look at the britskoda forum.
I am based in County Durham
 

MELenium

Registered User
Hi 1Rockape
I started to try this after looking at those sites you had giving me

09 Central Electronics
Security Code. 31347
Adaption 10
Then in the pull down menu I only found these 5 under Assistant light function:

Assistant light function-Assistenzfahricht bei regen. (assistant driving in rain)
Assistant light function-Humidity sensor
Assistant light function-Lichtsensorempfindlicht keit (light sensor sensitivity light)
Assistant light function-ls error ausgabe (is error output)
Assistant light function-Maskierung regenfunktion (masking rain function)

Was looking for something like:
Assistant light function-Menuesteurung fernlichtassistant (Menu control high beam assistant)

The only one out of them 5 that sounds remotely possible but I think it's for when it starts to get darker is:
Assistant light function-Lichtsensorempfindlicht kien (Light sensor sensitivity light)






2
 
Last edited:

1Rockape

Registered User
These are what I used on my A3 and TT and I think are the same across the board. But without the relevant codings in A5 module won’t work

ENG141650-MAS13782-Fernlicht_assistent-Will Beam assistant: responsivity adjustable via BAP,present ,6
ENG141650-ENG141973-Fernlicht_assistent-Erweiterte_Fernlichtsteuerung,AFS: Fernlicht ueber AFS ,6 >>>>
AFS;FLA Fernlight ueber AFS
ENG141650-ENG116637-Fernlicht_assistent-Menuesteuerung Fernlichtassistent,Not Present , >>>>present
ENG141650-ENG116641-Fernlicht_assistent-Menuesteuerung Fernlichtassistent Werkseinstellung,Not Present ,6 >>>>present


Sent from my iPad using Tapatalk
 

MELenium

Registered User
Hi 1Rockape
I've just noticed in the mmi under the external lights, it shows where you can switch the high beam assist on or off but the activation time where you could change from high, medium and low has disappeared, it was there before I coded the high beam assist. Should it still be there?
 

MELenium

Registered User
Hi 1Rockape
I've have reverted back to the beginning and recoded it slightly different and it now works correctly with the mmi showing Activation Time
 

1Rockape

Registered User
Great . Did you test the hba?what changes had you made that removed the menu as it wasnt in the list of adaptions i sent?

Sent from my SM-G973F using Tapatalk
 
Top