Coding ambient lighting

Direktorius

New Member
Joined
Jan 4, 2023
Messages
2
Reaction score
1
Hey guys, decided to retrofit ambient lighting into my audi a6c6 2008 avant. I've activated green menu via vcds and did this procedure:
GREEN MENU>DIAG SETTINGS>APK 0x01, 0x0B, 0x0C>Interior lighting (extended) ----this wasn't ticked, so i ticked it.
GREEN MENU>DIAG SETTINGS>CAR MENUS MASKE>Ambientebeleuchtung ----this wasn't ticked, so i ticked it.
After all this, the background lighting option has appeared inside CAR options, but whenever i try to adjust the brightness it goes back to lowest point after i exit the option. Whilst adjusting, not even the footwell lights are responding to whatever brightness i set it to. Is there any additional procedure that needs to be done? MMI 2G HIGH
 

Direktorius

New Member
Joined
Jan 4, 2023
Messages
2
Reaction score
1
Quick update
Hooray, found and resolved my problem! The problem was that i needed some extra programing done in order to activate Ambient feature. If anyone is interested and has the same problem this is how I resolved it via VCDS.
> 46 - Central Conv > Coding(07) > Coding helper > Byte 01 Bit 5 (Light package(PR-QQ1))
Make sure this is enabled in order for ambient to work. Have a good day!
 
Top