1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Car goes into limp mode after 60MPH

Usmxn Oct 4, 2018

  1. Usmxn

    Usmxn Active Member

    182
    28
    28
    Hi guys,

    My car seems to go into limp mode after 60 MPH, not sure why.

    I have changed a boost control sensor but that did not fix my issue.

    The fault code present after a VCDS scan is shown below.

    Address 01: Engine Labels: 03L-906-022-CBA.clb
    Control Module Part Number: 03L 906 022 RB HW: 03L 906 022 BQ
    Component and/or Version: R4 2,0L EDC G000SG 6552
    Software Coding: 0000172
    Work Shop Code: WSC 83712 043 404167
    VCID: 76E3F66001DF92F40E-8022
    1 Fault Found:
    000665 - Boost Pressure Regulation
    P0299 - 000 - Control Range Not Reached - MIL ON
    Freeze Frame:
    Fault Status: 11100000
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 255
    Mileage: 126169 km
    Time Indication: 0
    Date: 2018.10.03
    Time: 21:32:09
    Freeze Frame:
    RPM: 2530 /min
    Speed: 82.0 km/h
    Load: 100.0 %
    Absolute Pres.: 2601.0 mbar
    Absolute Pres.: 1336.2 mbar
    Lambda: 95.5 %
    Lambda: 24.5 %

    Thanks in advance
     
  2. Avatar

    Google AdSense Advertisement


  3. LEE69

    LEE69 07 170 DSG Team Dolphin Grey Audi A3

    2,490
    448
    83
    Possibly sticky veins in the turbo. There a product called revive that has got good reviews
     
    Usmxn and Luch like this.
  4. ch1z64

    ch1z64 C'mon you's bhoy's in Green Team Imola TFSI Owners Group Silver Supporter Team Sprint Audi S3 Manual

    3,028
    610
    113
    Might be worth sending @Sandra ( admin ) a PM and ask her to put the post into the faults section off site where u might get more views
     
    Usmxn likes this.
  5. ch1z64

    ch1z64 C'mon you's bhoy's in Green Team Imola TFSI Owners Group Silver Supporter Team Sprint Audi S3 Manual

    3,028
    610
    113
  6. Usmxn

    Usmxn Active Member

    182
    28
    28
    Just an update, had a garage take a look and changing the sensor made no difference so they think it is the turbo actuator
     

Share This Page