- Joined
- Nov 9, 2015
- Messages
- 1,060
- Reaction score
- 577
- Points
- 113
thanks for the offer - I have had a look at a few online
As usual,you're one step ahead of me
thanks for the offer - I have had a look at a few online
That's about stock from the looks of it, it actually opens up quite easily it's like a thin top layer, wasn't finished properly hence the errors shape.
Spending this evening getting the exhaust valves in, fingers crossed I won't lose any half collets done 4 of 8 so far
Can anyone explain these instructions / warning regarding the camshaft seals?
View attachment 168706 View attachment 168707 View attachment 168708
Fit them onto the cam before fitting camsCan they be fitted on the camshaft before fitting on the head or do they need to be pressed on after fitting the cams?
I expect they were ruined already lol, there's probably a chemical which goes off when the centre is popped out.
Thanks Karl... it makes it much easier doing that.
In other news I have ported the hot side now too match the gasket. It is done using aluminium oxide grinders, 6 for like about £3 I have ordered some carbide bits for the chinafold, I reckon that is made from stronger stuff.
View attachment 168757