Cam Shaft Position Sensor help

[JamesW1994]

Any guru’s know where to start with this one? Symptoms... Car bucks / jerks around 1 - 3k RPM occasionally, almost feels like a misfire but no codes for misfires at all. Its very noticeable. Past 3k always runs perfect. This has been happening a while but took some time for this code to appear. Thanks in advance


000010 - Camshaft Positioner (Bank 1 Intake)

P000A - 008 - Slow Response - Intermittent

Freeze Frame:

Fault Status: 00101000

Fault Priority: 2

Fault Frequency: 1

Reset counter: 255

Mileage: 116588 km

Time Indication: 0

Date: 2019.04.24

Time: 18:39:27


Freeze Frame:

RPM: 1336 /min

Load: 21.2 %

Speed: 31.0 km/h

Temperature: 30.0°C

Temperature: 11.0°C

Absolute Pres.: 980.0 mbar

Voltage: 14.351 V

 

[paddy]

Camshaft position is hydrolic, check oil level/oil pressure, pick up pipe etc also check wiring connection /plug to the position censor.
Clear fault code and see if it comes back, as its only faulted once it may be nothing to do with your problem.