Bobby Singh's Audi S2 avant project

[bobby singh]

Rear crank seal fitted using this borrowed tool

Oil pump machined - this is to allow the fluid filled pulley to have some clearance

All sump bolts cleaned

Getting there

Cheers
Bobby

 

[bobby singh]

Head parts are finally here:

Door card cloth

So the doorcard on the S2 have been degrading over time and the backing has been breaking away:

As you see above I managed to get hold of the origional material from Audi Tradition

Next task was to drill off the plastic welding for the door pockets

(wonder how long that gum has been there)

Ready for action:

Final result:

Used cable tie as welding rod and plastic welded the pockets back on:

Cheers
Bobby

 

[bobby singh]

New exhaust cam - managed to get hold of a brand new ABY exhaust cam

New s2 boot badge

B5 fuel tank shield (apparently with minor modification it can be used on the b4). Mine was totally rusted through so removed it sometime ago.

Boot wiring repair kit

Found this on ebay - have no use for it but old new stock is always nice

Cheers
Bobby

 

[bobby singh]

Home made tool for the fluid filled crank pulley

Cheers
Bobby

 

[bobby singh]

There's been a lot going on with the S2 in the background and its finally back from a full paint job.
Yes it was done last year however I wasn't happy with the colour match so best way to get around that is to have the whole lot done.
It come out very good and I'm impressed by the Bodyshop I used - they get my recommendation.

Nice to see the car is still solid under the body kit.

Here is a video:




Cheers
Bobby

 

[bobby singh]

Boot wiring repair loom

Cheers
Bobby

 

[bobby singh]

Rust from the door mirrors removed and now the rubber sit flat against the aluminium body

 

[bobby singh]

ECU Maxx preps:

Lambda 4.9 wiring

Cheers
Bobby