No, I got a light tint on the front, didn’t want to get the limo tints on the front
Mines almost the same spec bar the sun roof and silver leather.
Looks nice mate, you got a video with the sound of the intake? I'm considering getting one, just worried about warranty..
i need to get the black badges on mine ASAP... heard bay ones can be hit n miss on quality ? and the sizes vary ?
Good decision!So changed my remap date from 10th to the 19th. Just ordered the new milltek downpipe and im going to order the forge intercooler over the next couple of days and get the hardware fitted before my remap. So when I visit MRC I’m just going straight for stage 2.
I’ll update use when it arrives
So changed my remap date from 10th to the 19th. Just ordered the new milltek downpipe and im going to order the forge intercooler over the next couple of days and get the hardware fitted before my remap. So when I visit MRC I’m just going straight for stage 2.
I’ll update use when it arrives
Where did you purchase the Milltek downpipe from? I see it listed on their website but looks like you need to purchase through one of their stockists? £690 or did you manage to get discount off that?
Forge is £1060
Airtec is £950
Both claim very similar temp reduction figures
Do MRC map the gearbox as part of the Engine map and incorporate it into one package or is it a cost for the Stage 2 and an additional cost for the gearbox map? £1k?
530ps they claim
Luckily enough managed to source this Forge intercooler off the RS3OC form. Only been on previous RS for 4000 miles and got it at a great price so ended up cancelling my airtec intercooler. Fitted easily enough in around 2 hours. Didn’t need to jack up or take the wheels off. Hardest part was probably taking the bumper off.
Removed the hideous black trim they put in for some reason and removed the Rs3 badge as the silver looked out of place and wow. Think it looks much better imo.
Downpipe is due to get dispatched tomorrow and then get it fitted Friday and then the long drive to MRC on Monday for Stage 2
Sent from my iPhone using Tapatalk
Impressive! Wouldn’t dare think about tackling that myself. How easy was that black trim to remove? Keen to get rid of mine if it doesn’t take long. When spacers are getting fitted at autohaus would ask them to remove, providing reg plate could go back on easily. Front end looks seriously good now
Bit of a nightmare if I’m honest. It’s a bumper off job and then everything is just so tightly put together. Wouldn’t bother getting your bumper off just for that. I’d say wait until you have your bumper off for some reason in the future then take it out then. It won’t effect your number plate holder.
Ah ok. Looking in to cosmetic mods at the moment, looking at making it a bit different hence the q. Emailed ABT about lower front lip, waiting on a price.
Did you carbon dip the engine bits? Will fitting down pipe effect the map too much to drive or can you just drive off boost?Luckily enough managed to source this Forge intercooler off the RS3OC form. Only been on previous RS for 4000 miles and got it at a great price so ended up cancelling my airtec intercooler. Fitted easily enough in around 2 hours. Didn’t need to jack up or take the wheels off. Hardest part was probably taking the bumper off.
Removed the hideous black trim they put in for some reason and removed the Rs3 badge as the silver looked out of place and wow. Think it looks much better imo.
Downpipe is due to get dispatched tomorrow and then get it fitted Friday and then the long drive to MRC on Monday for Stage 2
Sent from my iPhone using Tapatalk
Post the price on here please!
Lmfao can only get it as part of a full build which is 15k lol. So may have to be Maxton lol
****** hell!!
I’ve seen one of those on a car and it looks the most anti-VAG add on I’ve ever seen haha! Not a fan
There are three options for front splitter though. Go check the lad Dr Josh Pillay...his RS3 has one and looks good
Love sepang!
Did you carbon dip the engine bits? Will fitting down pipe effect the map too much to drive or can you just drive off boost?
I’m planning to do that as £650 is way ever priced lol being cheap on a £57k spec’d car but got to save money for modsYup got them carbon dipped
That’s different to what I thought, I was thinking of the thin black plastic sheet splitter.
I was considering it as I’ve had them before, but on my Fiesta... I honestly don’t think I could drill the bumper on the RS... painful!
I thought the holes were already there?!
Every mod I’m thinking of there seems to be a draw back lol. Just want to make it different, like the Oettinger rear spoiler on my R, but there doesn’t appear to be much in the way of aftermarket spoilers or side skirts etc
For the splitter? Far as i am aware any splitter requires drilling into the bottom of the bumpers to fix.
Yep same here! It won’t do any harm drilling the bumper on the underside but it’s just a mental thing, I don’t want to go drilling holes in my £54k car
I’m after visual changes that are warranty friendly and out of options too, just because Audi make the car near perfect from factory styling wise. I found that from the time I got my first Audi.. my A3 S Line, they are just spot on. I’ve looked at a spoiler lip but again I don’t really want to be bonding stuff to the body and I’m not sure if it would look a little silly.. it’s just the need to make the car ‘my own’.
I really want springs but I just can’t lose the drivetrain warranty like most of us and it’s ridiculous you lose the lot with just springs.
Do you guys declare these mods on your insurance?
That the Maxton spoiler? Looks quite good and it’s only 3M tape that holds it on I’m sure. Would look good against Nardo, Red or black, don’t know how it would look with yours given the Alu pack. Your motor is classy, mine just looks a bit wide boy lol. What about painting the calipers?
Are you going to do full system later or just stick to std one?So my milltek decat downpipe arrived this morning. So excited to get this fitted. Just need to find somewhere to fit it this weekend and then I’m all ready for stage 2 MRC tune on Monday morning.
Sent from my iPhone using Tapatalk
Let us all know how it sounds with a video
Are you going to do full system later or just stick to std one?