Please check your speaker grills after the Bang and Olufsen recall is applied. This is how the dealer handed mine back.
Sent from my iPhone using Tapatalk
B&O logo strip bent?
Looks like they applied the glue with a spade. That's got to be worth a name and shame, I wouldn't want to have my car worked on with such a lack of skill and care.
Probably needs new door trims now. I think that warrants a extremely strongly worded complaint to the service manager with a copy to audi cs..
Looks like they applied the glue with a spade. That's got to be worth a name and shame, I wouldn't want to have my car worked on with such a lack of skill and care.
https://www.audiworld.com/forums/a4-b9-platform-discussion-212/bang-olufsen-recall-70g6-2937335/What is the actual recall? Is it the B&O strip logo coming off? Is it really worth the effort for them given the possible side effects of doing a bad job like this? Just put some prit stuck under neath it. That’s what I’ve done
It’s Crewe Audi, I’m willing to give them a chance as mistakes can be made, the sign of a good organisation is what they do about it.
Sent from my iPhone using Tapatalk
That's a shame, they are sponsors on here and seem to be quite helpful. Unfortunately, what has happened here seems more than a mistake, the person that did that must have known what they had done yet still handed it back in that state without saying anything to anyone or attempting to put things right. There was another car on here where the garage put a hole in the bumper but they put their hand up and got it sorted out - that's how you show you are a good organisation.
Please check your speaker grills after the Bang and Olufsen recall is applied. This is how the dealer handed mine back.
Sent from my iPhone using Tapatalk
@Keef how did you get on? did you have a choice in having them replaced?Service day for me, still can’t decide on this if I should let them do this!? Had a good look over my trims last night and took lots of photos, mine seem fine and not sharp at all. I can see a possible risk of the front trims becoming an issue but not the tears as they are slightly rounded - do they replace all?
Thanks how does it look as from what I can see from OP it’s still sticking out at the end? If you get a chance can you take a picture of the full length?@rasA4 didnt get to ask if I had a choice, I flagged up my concerns prior to the works! Have to be honest they’ve done a neat job, but I would expect no less as realistic it’s just replacing trim with stickers. Looks ok just not as good as the metal trim did.
Mine are coming off too . Made them look cheap and not what i spent the extra money on when buying@rasA4 on closer inspection the stickers are a poor solution and the fit is terrible, radiused corners and not profiled to the original shape of the trim at the edges.
Also noticed one is coming away at the edge
View attachment 160349 View attachment 160350 View attachment 160352
They originally said it was only the front doors as the rear trims didn’t pose the same risk, but they’ve replaced all 4
On the plus side, no damage!
Thanks @Keef when you get a chance can you post up a pic of the full width head on? looks like they still stick out? much appreciated!@rasA4 on closer inspection the stickers are a poor solution and the fit is terrible, radiused corners and not profiled to the original shape of the trim at the edges.
Also noticed one is coming away at the edge
View attachment 160349 View attachment 160350 View attachment 160352
They originally said it was only the front doors as the rear trims didn’t pose the same risk, but they’ve replaced all 4
On the plus side, no damage!
I’ll be insisting they don’t change them on mine when it goes in for it’s first service soon!When my car goes in for a service I hope they dont change these!
let us know how it goes,I’ll be insisting they don’t change them on mine when it goes in for it’s first service soon!