Aux port

[John palmer]

Hey guys bought an aux port of ebay with the grey plug that goes into the rnse navigation unit at the rear I've plugged it in and routed it but cant seem to get the aux to light up in the radio I have coded the 5 into the code and restarted and nothing came up what am I doing wrong? Help plz

 

[Matt268uk]

Try this

1. Connect with module 37 – Navigation.
2. Choose procedure 07 – Coding.
3. Read original coding (e.g. 0205115). Write down this number.
4. Change second to last digit by adding +4 to current value. E.g. 0205155.
5. Enter and save new coding.
6. Exit. Then choose either media or cd button on your RNS-E to show the aux. Hope this helps.

 

[ch1z64]

Once you followed the steps above iirc you need to reboot rnse ( hold Radio+setup ) until it reboots then go into source ( top right button ) and you should see Aux in there