Auto windows after regulator replacement

[marcoandrade1]

Hi I just replaced the window regulator on a audi a5 8f7 cabriolet 2011.. Window goes up and down perfectly however it does not go up and down automatically with the one touch... It also does not lower the window 10mm when you open the door vice versa when you close it... Any help will be appreciated
Pfa

Sent from my VOG-L09 using Tapatalk

 

[KrisKrk]

Here's how to reprogram the windows again:

Ignition On
Window all the way down
Window all the way up
Let go of switch
Press window switch up again for 2-3 seconds, let go

The regulator should now be re-adaptied.

As for dropping the window lower, that would probably need to be looked in to.
Start with car scan via OBD2 if any faults come up and clear them.

Sent from H P20 PRO

 

[marcoandrade1]

Here's how to reprogram the windows again:

Ignition On
Window all the way down
Window all the way up
Let go of switch
Press window switch up again for 2-3 seconds, let go

The regulator should now be re-adaptied.

As for dropping the window lower, that would probably need to be looked in to.
Start with car scan via OBD2 if any faults come up and clear them.

Sent from H P20 PRO

Thanks for the response.. I have tried this multiple times multiple different ways and it doesn't seem to adapting

Sent from my VOG-L09 using Tapatalk

 

[KrisKrk]

Hmmm
Strange that is.

Scan it then as you might need to adapt the actual door module to the car.
Mate of mine had it on he's A4 where door module fried and he replaced it with second hand and it wasn't working. Coding had to be done and it still wasn't happening.
He replaced it with other one, which computer recognised and it worked

Sent from H P20 PRO

 

[RyanJonS4]

I thought you had to hold it down for the full open cycle and keep held down for a few seconds after its open then hold it up for the full close cycle and hold it closed for a few seconds once it’s closed.