Auto Hold retrofit help please with Manual RHD

[setdet]

I received this from an Ali Express order without any instructions. The seller is not replying to my messages through the website. Does anyone have or can provide information or a link to how to install this kit into an A4 B9 Manual Right Hand Drive. All the guides I have seen are for auto and/or left hand drive.

 

[PtPixel]

Try this: https://munteanubogdan.com/english/retrofit-auto-hold-audi-a4-b9-english/

 

[setdet]

Erm,
That's left hand drive AND auto.
You did read my OP ??

 

[PtPixel]

Then just mirror flip the images. Theres probably no difference

 

[setdet]

Anyone else please?

 

[Daggerit]

As previously said, all the mounting points will just be mirrored for LHD/RHD. And the manual/auto probably won’t make any difference, just take a look and see if the colours and number references for the wiring is the same as the link above and go from there.


Sent from my iPhone using Tapatalk

 

[setdet]

As previously said, all the mounting points will just be mirrored for LHD/RHD. And the manual/auto probably won’t make any difference, just take a look and see if the colours and number references for the wiring is the same as the link above and go from there.


Sent from my iPhone using Tapatalk

Quite, but the concern is that some bits are not mirrored, so what is and what is not. Are the pin numbers same, are the locations of looms same, are.... you get my drift? I'd just rather a UK guide if it's all the same thanks. £18K car and I have no appetite to break it.

 

[Daggerit]

Quite, but the concern is that some bits are not mirrored, so what is and what is not. Are the pin numbers same, are the locations of looms same, are.... you get my drift? I'd just rather a UK guide if it's all the same thanks. £18K car and I have no appetite to break it.

If it makes you feel any better I just ripped interior plastic parts of my £67k RS3 apart based on a LHD guide and all the attachment points were the same. Granted two wires were different than the LHD version, but that’s why I was saying to check.


Sent from my iPhone using Tapatalk

 

[Loky]

I did the AH on B9 left hand automatic, before the upgrade, I check few materials for it and gearbox really make no change, LHD/RHD also shoud be OK as the main unit pins should be on same side. I can send you the manual I obtain for LHD by the company, but in private message as there is my email all over the manual as a water stamp...

 

[setdet]

I did the AH on B9 left hand automatic, before the upgrade, I check few materials for it and gearbox really make no change,...

Pardon? Do not understand

 

[Loky]

I'm sorry for my english, I did Autohold upgrade with Kufatec kit and from the manual (from Kufatec) it seems like there is no difference if you have a manual or automatic transmission, same as there is no difference if you have LHD or RHD as the main unit is located on same place. I can share the instalation manual with you, bud not here as it has watermark with my email and adres on all pages. If you still can't understand, let me know what what part...

 

[Abi7]

Hello. Would you mind sending me instructions for auto hold? Thanks

 

[Fatyead]

Just follow the guide linked in the post, it will work for both RHD and LHD the control unit is in the same place it's just the trim and switch that is different.
if unsure of the pinouts look for the wiring diagrams on google.