Audi rs3 8va oil catch can

[Redderz]

@Arcam the 2.0 TFSI engine (EU engines only) as used in the S3 has an extra injector upstream of the inlet valves (4 extra in total) precisely to try and cure this issue, it's a very well known issue on FSI engines, esp on the V8's. They did look briefly at introducing this for the 2.5 5-cyl but there were too many packaging issues.

Interesting I haven't seen this is it 8 injectors total then?

 

[Spaceman_RS3]

Could you boil up what you got and see how much water goes and how much oil it leaves?

 

[veeeight]

Interesting I haven't seen this is it 8 injectors total then?

Yes, 4 FSI Injectors, plus 4 Indirect injectors mounted in the inlet manifold.

Only EU EA888 engines though, the EA888 sold in US and Canada do not have the indirect injectors.

 

[Redderz]

Could you boil up what you got and see how much water goes and how much oil it leaves?

I can't boil it up because I tipped it away but I have fitted a VTA over last weekend which I will post soon and now I have both front and rear pcv plumbed in so when I get to 400 mile I will post and boil up

 

[Phenyl85]

For anyone interested in an oil catch can on a 2.5 TFSI also have a look at a catch can in a TT RS (with the same engine as the RS3)
http://www.audi-sport.net/xf/threads/oil-catch-can-on-audi-tt-rs.264682/#post-2683727

 

[Phenyl85]

Can you post soms pics of how your setup looks Now with the VTA?

 

[Redderz]

Can you post soms pics of how your setup looks Now with the VTA?

I will take some pics tomorrow and post them for you

 

[Redderz]

Finally I have attach the pics of my VTA catch can it is the same set up as my first but I have removed the filter from the front cam cover breather and plumbed it in to the catch can I will also be sorting out the mass of jubilee clamps on the front breather by fitting a longer 13mm hose.

 

[Redderz]

Can you post soms pics of how your setup looks Now with the VTA?

Here are some pics

 

[fernando young]

Sorry for reviving this thread.
How is that closed system catch can working so far?

 

[L1ARR]

Would love to know if anyone has fitted a forge or Iroz one and the results from them.