No it wont. S3 bumper is made from aone peace, A3 from two. The A3 lower gril is actuly a lower part of the bumper.
Thanks mateebay for bumper and then get it painted mate. thats your best best or steelers...
..ok few pics from the other day this should help the people interested in the wings...
OK bascially the wings line up as normal under the bonnet check your gaps and also pay attention to the adjusters behind the splash guard and also the ones the front of the wings bolt too... onece lined up properly bolt it all up and you get a nice straight wing....
OK when at this stage i will assure you, you need the wing end covers off a S3! part no's :- 8L9 821 111, 8L9 821 112
these will ensure no crap comes through, the splash guards fitted good enough to warrent not worrying about getting S3 ones too so thats fine...
now for the bottom of the wings... Basically the wing foul the sill on a normal A3 so i needed to cut a diagonal so the wing misses the sill
unsure how clear this is but here:-
So then i began to scratch my head about securing the lower part... So initially i made a steel mount which was very agricultrual... And i really needed something that curved with the sill and met the wing!?
SO i had a brainwave and cut the sill part on the STD wing and adjusted it and welded it cut a hole and bolted it onto the wing ...
this was not SOLID as i bolted into the STD plastic fitting but holds in place nice what could be done it washers and nut and bolt i'll leave mine just for now tho....
heres the sill :- (apologise for the bracket looking gash i will be removing it tomorrow and rubbing it down and hammeriting it
So basically thats the wing conversion... ALSO dont forget you need the S3 front bumper guides to fit the S3 bumper on too :icon_thumright:
heres a front pic
will explain about the rear bumper tomorrow as i'm tired
Ad...
You can find any part number on vagcat.comDoes anyone knows what is the part number of this part in the pictures?
I need right and left part number.
This a 8L S3.
Does anyone know information on doing this for a 2005 8P?? I bought my boyfriend a new genuine S3 chrome grill after stupidly taking advice from guy in store that it would fit directly onto car which is a 2005 5door A3 Sline Quattro - now i need to go and buy the rest new bumper etc - can anyone help me??? Please??
I have just fitted an S3 rear bumper to my a3 tdi, was fairly straight forward, but it doesn't quite line up right, im guessing I need to buy the S3 rails and re fit the bumper on to the S3 rails?
I also got a s3 tailgate with spoiler and the facelift rear lights, all in the same colour as my A3! One slight problem the tailgate is from a facelift and mine is pre facelift, the electrics for the central locking and lock barrel seem different so I wont be able to swap my lock over!? Has anyone done this successfully ?
Cheers
Rich
why is people saying you do need the rails and other' you dont!
Have you looked in the FAQs thread, iirc it should be in there.Have I dreamt a rear bumper how too on here or has it gone as I can't find it anywhere and I pick up my S3 bumper later today !!!
Thats very helpfull to know nice 1 so would you say its a nice fit ? I've heard the bumpers ok but the rear is allot harder to fit as the rear arches are allot wider than the a3 what do you think lad.?As I am in the process of getting this done i thought id put this up for anyone who plans to do it as it helps alot.
All prices are from Agnew Audi - Belfast and include VAT.
Front Bumper (S3 Bumper)
P/N 8L9807111CGRU Price: £258
Front Lower bumper grills (S3 Bumper)
Left Lower:
P/N 8L98076813FZ Price: £20.50
Centre Lower:
P/N 8L98076833FZ Price: £29.14
Right Lower:
P/N 8L9807682A3FZ Price: £20.24
S3 Lower Front Grille Clip (centre) :
P/N - A8L9 807 807 (CLIP) Price: TBA
Front Washer Jet Covers (S3 bumper)
Left:
P/N 8L9955275GRU Price: £9.54
Right:
P/N - 8L9955276GRU Price: £9.54
Front Bumper Guide Rails (S3 bumper)
Left:
P/N 8L9807183A Price: £5.32
Right:
P/N - 8L9807184A Price: £5.32
Back Bumper (S3 Bumper)
P/N 8L9807437GRU Price: £249
Back Bumper Insert (S3 Bumper)
P/N - 8L98073417DL Price: £58.83
Back Bumper Guide Rails (S3 bumper)
Left:
P/N 8L9807377CD Price: £12.88
Right:
P/N 8L9807378CD Price: £12.88
Any Questions Id be happy to help.
Correct I have one on the A3 8L arches does not line up perfectly I have tried changing the mounts and stuck with the original A3 onesThats very helpfull to know nice 1 so would you say its a nice fit ? I've heard the bumpers ok but the rear is allot harder to fit as the rear arches are allot wider than the a3 what do you think lad.?
Correct I have one on the A3 8L arches does not line up perfectly I have tried changing the mounts and stuck with the original A3 onesmmh
I think you need to rewrite some of that message as some of it is a bit garbled lolMmh ok fair how noticeable is it are you looking to change it? So I need a decent k04 turbo and induction kit you onow of any food 1uality 1s but not ridiculously expensive with out sounding like a bum lol ?
Lol * good quality was ment to sayI think you need to rewrite some of that message as some of it is a bit garbled lol
Sent from Syknet Global Defence Network
I'm not the man to talk about turbos as I'm naturally aspirated there are a couple of stickies about induction cones etcLol * good quality was ment to say
Gd stuff mate what you recon with the mamba ko4 kits, ? Any good? And 1 mote thing I've found a milltech exaust cat back for a vw polo gti but have separately bought the milltech down pipe specifically for my reg not sure if its gonna fit wanna check before I go ahead and buy it yano as its well hard finding mods for a 2001 a3 lolI'm not the man to talk about turbos as I'm naturally aspirated there are a couple of stickies about induction cones etc
Sent from Syknet Global Defence Network
Do you know if a vw polo gti 1.8t milltech exaust fit my a3 ? As I've bought a down pipe also milltech but thats actually for my reg just wondering if they will piece together and also if the exaust will fit on my car?I'm not the man to talk about turbos as I'm naturally aspirated there are a couple of stickies about induction cones etc
Sent from Syknet Global Defence Network
Check in reference the bore and length/shape of the pipe you can always join them up up which is not a problem I would personally go to 7zap on milltek site to compare the sizes.Do you know if a vw polo gti 1.8t milltech exaust fit my a3 ? As I've bought a down pipe also milltech but thats actually for my reg just wondering if they will piece together and also if the exaust will fit on my car?
Got any pics or references? Got this on my A3 8L for a while now all good.Do you mean this one file:///C:/Users/markp/Downloads/SSXVW109_1__50983.1524758967.webpDo you know if a vw polo gti 1.8t milltech exaust fit my a3 ? As I've bought a down pipe also milltech but thats actually for my reg just wondering if they will piece together and also if the exaust will fit on my car?
Its this 1 I think its the same yh and this aswellGot any pics or references? Got this on my A3 8L for a while now all good.Do you mean this one file:///C:/Users/markp/Downloads/SSXVW109_1__50983.1524758967.webp
Its this 1 I think its the same yh and this aswell
Whats it called have you got the link for the web site mate as tried typing it in and came up with nothing I've probley typed it in wrong says I've gotta get an s3 qautro milltech cat back to fit the down pipe for a 2001 a3 milltech decat I don't even know whats happening lol I'm a beginner at this the helps much appreciated by the way guys so nice 1and if your wondering what I'm actually doing I've currently got a 2001 audi a3 1.8t sport wich I bought not long ago with a stage 1 remap and custom back box I've literally bought it to upgrade everything ready for its stage 2 and is currently going through an s3 conversion its literally a summer project and is the 1st car I've done much on so once again help is very appreciatedGot any pics or references? Got this on my A3 8L for a while now all good.Do you mean this one file:///C:/Users/markp/Downloads/SSXVW109_1__50983.1524758967.web
Whats it called have you got the link for the web site mate as tried typing it in and came up with nothing I've probley typed it in wrong says I've gotta get an s3 qautro milltech cat back to fit the down pipe for a 2001 a3 milltech decat I don't even know whats happening lol I'm a beginner at this the helps much appreciated by the way guys so nice 1and if your wondering what I'm actually doing I've currently got a 2001 audi a3 1.8t sport wich I bought not long ago with a stage 1 remap and custom back box I've literally bought it to upgrade everything ready for its stage 2 and is currently going through an s3 conversion its literally a summer project and is the 1st car I've done much on so once again help is very appreciated