1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Dismiss Notice

Airbag light confusion

HelenB Apr 18, 2020

  1. HelenB

    HelenB Member

    31
    9
    8
    I have airbag light on the dash permanently and code 01218 which should be a passenger side problem. I was preparing to do this connector removal procedure :


    However, when I lifted the seat the connector isn't there. I have a black connector which must be unrelated to airbags and some yellow wrap on the other wiring. I assume the job has already been done?
    Is it likely to be the yellow plug going into the floor causing a problem? Is it worth removing, cleaning contacts and refitting? Has anyone done similar things to get rid of the airbag light? Thanks.
     

    Attached Files:

  2. Avatar

    snack-media
    Advertisement


  3. QuattroCalum

    QuattroCalum Well-Known Member Saloon saloon Audi A4 Black Edition Manual

    2,010
    717
    113
    Black connector is for the lumber support adjustment, there's a large plastic cover on the carpet, lift that up from the front your airbag connector is under that.

    Sent from my MAR-LX1A using Tapatalk
     
  4. HelenB

    HelenB Member

    31
    9
    8
    Yeh, thanks. Found it. Don't know if it's likely to be the problem?
     
  5. QuattroCalum

    QuattroCalum Well-Known Member Saloon saloon Audi A4 Black Edition Manual

    2,010
    717
    113
    I cut the connector out of mine, soldered the wires together, job done

    Sent from my MAR-LX1A using Tapatalk
     

Share This Page

Do Not Sell My Personal Information