Aftermarket steering wheel fitment

[Lenny Benford]

Hi just after a bit of help with the fitment of an aftermarket steering wheel, have a momo with the adapter but when I went to fit it the steering angle sensor was in the way so do I have the wrong adapter or is there another way around it?

Foot to mention on s3 thanks

 

[Prawn]

The clock spring has a square plug sticking out at the top, and 2 holes, one on each side.

A decent boss should have a hole for the square plug and 2 pins to locate into the 2 holes.

My genuine momo boss has these. Was yours a genuine one? Have you got a hybrid pictures you can add?

 

[Lenny Benford]

Yes I bought one from China so that's probably why it's not right tbh prawn I thought if you could fit one I would find out here so thanks for that I will have to get a real one then it will fit ok by the sound of it

 

[Lee.S]

interested in this thread.
How did you fit the horn prawn?

 

[Prawn]

Genuine one was only around £40 so not too big a problem

Buy from a known seller then you know its the real thing.

 

[Prawn]

Horn just plugs in via spade connectors mate. Any half decent steering wheel should come with a button.

 

[Lee.S]

Genuine one was only around £40 so not too big a problem

Buy from a known seller then you know its the real thing.

Hi prawn this one I been watching for awhile on ebay but It more than £40.

http://www.ebay.co.uk/itm/331817481907?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT