Adjustable Tie bar's

[RS3 ROCKS]

Has anyone had any experience with these Tie Bars? I 'm looking to for some on the rear of mine to see if it sorts out the bad negative camber on my standard suspension set up or if the problem is bush related.

http://www.ebay.co.uk/itm/ADJUSTABLE-DROP-LINKS-VW-GOLF-MK4-AUDI-A3-SEAT-LEON-/400684701772?

Cheers

 

[S3 Hilife]

They're not tie bars and they won't help you with your camber problem. I'd be looking more towards worn bushes and damaged springs tbh If your suspension is all standard

 

[RS3 ROCKS]

They're not tie bars and they won't help you with your camber problem. I'd be looking more towards worn bushes and damaged springs tbh If your suspension is all standard

It's a mystery. I've had it on the ramps this weekend. The suspension arms are rusty but no cracks, the bushes have seen better days but material around it is rusty, suspension springs are good with no sheared coils and the tie bars were replaced 6 months ago. I'm getting a creaking from the rear but I've put this down to the bushes from my ARB after uprating to an R32 one. It starts making the creaking noise shortly after installation.

I don't want to buy various items just to have it not rectify the situation though so am looking at options

http://www.ebay.co.uk/itm/Forge-Mot...35c77c2&pid=100033&rk=2&rkt=4&sd=322045421258

 

[crispynz1]

I've got these - http://www.cbauto-solutions.co.uk/#!stainless-steel-adjustable-tie-bars/ch3k

 

[RS3 ROCKS]

I've got these - http://www.cbauto-solutions.co.uk/#!stainless-steel-adjustable-tie-bars/ch3k

Did you have the same issue with adverse negative camber on a standard setup, and did fitting these alone fix the issue following a 4 wheel alignment?

I've read so many different reasons from replacing hub's to rectify the issue to fitting these adjustable tie bars, or adjustable ARB links.

I don't want to make the wrong decision and still have the same end issue.