SDHA4SLine
Registered User
Part numbers? Are they straight fit genuine items? If not how do we fit them? Thanks
Part numbers? Are they straight fit genuine items? If not how do we fit them? Thanks
Great Job! Looks lovelyTired or scratched aluminum trims??
A couple of evenings with a sander then finer grades to remove the fish scale and "brush" the trims. Some clear coat and you'll have a stunning set of trims.
Or if they have some deep scratches or dents, sand, fill, sand, prime, paint and clearcoat if required.
Cheap, easy and if you take your time great results can be had.
Just a few mods thenI've been following this thread for a while now (even before I picked up my car). I got a phantom black B7 avant Special Edition Quattro S-Line, luckily the car had most of the mods (puddle lights, warning door lights, black edition window surrounds and roof rails), I added some black S-Line badges all around, colour coded the repeaters black to match the body, rear wiper delete (with glass bung), debadged the rear, retrofitted RS4 Xenon lights with clear corner mod, got a nice set of black LED tail lights and a set of power folding mirrors from eBay that other day, they arrived yesterday so I fit them last night. I had to take the door cards and trim bits off to change the modules for the mirrors so after reading this I might just take all the trim bits off later and give them a sand down and freshen up. The other bits I have left to do is upgrade to the LED interior lights, paint the innards of the headlights then refurb and powder coat the wheels. I just need to code the mirrors to fold in when locked and I want to add the RS4 mesh to the air intake vents, I'm also considering wrapping the vents in carbon first along with the door pillars and rear diffuser
Sent from my SM-A310F using Tapatalk
Nice one. Dont forget you also have Dectane rear upgraded LED Tail lights.I've been following this thread for a while now (even before I picked up my car). I got a phantom black B7 avant Special Edition Quattro S-Line, luckily the car had most of the mods (puddle lights, warning door lights, black edition window surrounds and roof rails), I added some black S-Line badges all around, colour coded the repeaters black to match the body, rear wiper delete (with glass bung), debadged the rear, retrofitted RS4 Xenon lights with clear corner mod, got a nice set of black LED tail lights and a set of power folding mirrors from eBay that other day, they arrived yesterday so I fit them last night. I had to take the door cards and trim bits off to change the modules for the mirrors so after reading this I might just take all the trim bits off later and give them a sand down and freshen up. The other bits I have left to do is upgrade to the LED interior lights, paint the innards of the headlights then refurb and powder coat the wheels. I just need to code the mirrors to fold in when locked and I want to add the RS4 mesh to the air intake vents, I'm also considering wrapping the vents in carbon first along with the door pillars and rear diffuser
Sent from my SM-A310F using Tapatalk
I've been following this thread for a while now (even before I picked up my car). I got a phantom black B7 avant Special Edition Quattro S-Line, luckily the car had most of the mods (puddle lights, warning door lights, black edition window surrounds and roof rails), I added some black S-Line badges all around, colour coded the repeaters black to match the body, rear wiper delete (with glass bung), debadged the rear, retrofitted RS4 Xenon lights with clear corner mod, got a nice set of black LED tail lights and a set of power folding mirrors from eBay that other day, they arrived yesterday so I fit them last night. I had to take the door cards and trim bits off to change the modules for the mirrors so after reading this I might just take all the trim bits off later and give them a sand down and freshen up. The other bits I have left to do is upgrade to the LED interior lights, paint the innards of the headlights then refurb and powder coat the wheels. I just need to code the mirrors to fold in when locked and I want to add the RS4 mesh to the air intake vents, I'm also considering wrapping the vents in carbon first along with the door pillars and rear diffuser
Sent from my SM-A310F using Tapatalk
Yeah, AudiRetrofits quoted me £250! They have a module and some coding that enables them to fold on arming the alarm. I can't justify that to my other half tho... unless any of you guys can help me come up with some good spillYou cant code the mirrors to close on locking unfortanatly
so your looking to downgrade then to a lesser model...shame on you, B7 by far the best and If I ran audi i'd run the model all over again ....but that's just me.
Remap the hell out of the B8, with catless downpipes and all the breather mods and you wont notice the difference
At least we think its blackquattro GmbH B7 2006 2.0TFSI 220 Avant quattro S-Special Edition, Brilliant Black
My b7 is 280bhp and 430ft lb but it's a shame the 4wd and weight dumbs the power
Only option is cut out DPF inards and remap again
Not worth the hassle really
Wow, are you sure its not 430 NM ? If so, 430ft lb is BIG torque.
Still impressive regardless!
I would do it..
Yes 430lb it was 565ish in NM, or somewhere close
Thanks for these this is what ive got so far.
Done:
LED interior lights
LED number plate lights
Interior ambient lighting
Audi logo puddle lights
Wind deflectors ( dont have auto folding mirrors and tried manually folding drivers side in and cracked the wind deflector, this happened to anyone else?)
Rear windows tinted
To do:
Cruise control
Xenon headlamps upgrade
Front and rear footwell lights
Clean steering wheel/gear stick, i didnt know they was leather i thought they was plastic haha
Maybe list:
Alloys back to stock (got them finished in black but im 50/50 on if they look good or not. (full car is black) )
De badge
Front bumper splitter
Boot lid lip/spoiler
Car is 2.0T s line special edition, been having a thought in the back of my mind if i should buy the car again (same engine/colour) but with quattro and just swap everything over...Kind of regretting not buying a quattro model now....every time i put my foot down just get the ESP kicking in unless its bone dry roads
Would this fit the b7 non sline model?SEAT LEON CUPRA R FRONT SPLITTER
Part number 1ML 805 903 approx £40 + the cost of a few stainless steel self tapper screws.
View attachment 50831
Cool cheers Rob.That is the Mk1 splitter Shaun , same as mine, will fit your non s-line fine .
Looks terrible??here you go , fitted to a non s-line bumper.
I've thought about that but then it's the cost to get it sprayed, then the aftermarket grills aren't as available as se bumper grills. I'd have to try and find more pictures of that splitter on standard bumper I thinkMaybe the fitment did'nt help as i've seen it on a few and they looked ok, maybe another plan would be to lookout for a cheap s-line bumper aswell, plenty around and not all silly money.
Sadly a lot of these mods are not so "Affordable" anymore , but a few are.
Be careful though as many "B7 Enhancements " can get a tad costly by the end , do your research first before rushing into anything.
best of luck chap.