A4 B7 DTM Edition lowering options

[hooosay13589]

Hi,

I was wondering if you could give some ideas on the lowering options. I would like the car lowered to the arches being just a few mm above the tyre so not rubbing basically.

thanks.

 

[DPM]

Morning,

Thank you for your post.

Lowering springs or a lowering springs and shocks kit would be an option but I don't think you'd get the stance you're wanting from them so coilovers may be the route to go.

Did you have a budget in mind for what you wanted to spend and I can get some options together?

Also can you just confirm it's the 2.0T FSi Quattro model?

Damian @ DPM Performance

 

[hooosay13589]

Hi,

cheers for getting back to me.

Yes its the 2.0tfsi quattro dtm edition.

I think really at the moment i dont really want to go over £200.00 as on a budget at the moment. Maybe in the future this could change but not yet.

Thanks

 

[DPM]

I'd say sticking with lowering springs will be a better option then, maybe something like the H&R 45mm springs or Apex 40mm springs will get you close to the stance you want.

https://www.dpmperformance.co.uk/ca...pringsa4-b7-avant-saloon-20t-fsi-quattro-0105

https://www.dpmperformance.co.uk/ca...o-20tdi-quattro-30tdi-quattro-32-quattro-0105

Damian @ DPM Performance

 

[hooosay13589]

ok thanks for this. Would the car rub at all on the 45mm? Also my front seems to sit higher than the rear is this fairly normal?

 

[DPM]

What wheels are you running?

Yes it is something that quote a lot of B6 and B7 owners mention about the standard suspension.

Damian @ DPM Performance

 

[hooosay13589]

Ive got the standard 18 inch dtm alloys on the car.

 

[DPM]

Shouldn't have any problems then.

Damian @ DPM Performance

 

[Tooty_Fruity]

Damian,
Can you quote me for the Eibach Pro spring kit (30mm) for the DTM 2.0tfsi Quattro
I think the ref is E10-15-003-04-22 although there is an 05-22 kit with the same reference of vehicle fitment.
Tx.

 

[DPM]

Damian,
Can you quote me for the Eibach Pro spring kit (30mm) for the DTM 2.0tfsi Quattro
I think the ref is E10-15-003-04-22 although there is an 05-22 kit with the same reference of vehicle fitment.
Tx.

Morning,

Is it a saloon or an avant?

Damian @ DPM Performance

 

[Tooty_Fruity]

Damian - the DTM is saloon only
Lowered as the S-line SE but the DTM has unique spring and damper settings.

 

[DPM]

Please confirm your front axle weight.

Damian @ DPM Performance