I thought the map sensor was for example 2550 mbar - where ambient pressure is ~ 1 bar - so it is really 1.5 bar / 21psi? like my android torque goes to 34psi - but the analogue gauge only went to 20psi? his DIS is only going to 1.5 bar - it must be putting some other maths into it maybe a built in barometer? sensor in the device - or an estimate unless there is another sensor in the AUDI for this? I did also see a VCDS youtube clip of setting other bits for the DIS - maybe for newer cars?
Bit of practice during mapping, only at 1.6-1.7 bar and short shifting 1-1.5k, results look promising and car feels rediculous at higher boost and rpm
Upward slope for most of this so am sure it can go off the clock! Got a bit bumpy at 130 so had to back off a bit. . Up to 60 in around 5 seconds
Hi guys I've made a video on the 2012 Audi A3 SE 2..0 and i talk about the issues I've encountered with the car whilst doing the review.