Hello Lads,
Scanned a forum members A1 the other day and for some reason all the byte tickboxes in the longcoding did not show any descriptions i was going to activate Hill hold but could not and it did not show the security code either when you hovered the cursor over the box.
Can anyone help. Its a 14 plate A1. heres the scan off VCDS.
Address 03: ABS Brakes (J104) Labels: None
Part No SW: 6R0 907 379 BK HW: 6R0 907 379 BA
Component: ESP9.0i front H03 0002
Serial number: --------------
Coding: 33DF488B232502C9CC1C1269C45A40951009
Shop #: WSC 00046 412 00000
ASAM Dataset: EV_Brake1ESP90iBOSCH 003020
ROD: EV_Brake1ESP90iBOSCH_AU21.rod
VCID: 88197F493306095E537-80DD
No fault code found.
I did contact Rosstech but no joy as of yet.
Cheers Dan
Scanned a forum members A1 the other day and for some reason all the byte tickboxes in the longcoding did not show any descriptions i was going to activate Hill hold but could not and it did not show the security code either when you hovered the cursor over the box.
Can anyone help. Its a 14 plate A1. heres the scan off VCDS.
Address 03: ABS Brakes (J104) Labels: None
Part No SW: 6R0 907 379 BK HW: 6R0 907 379 BA
Component: ESP9.0i front H03 0002
Serial number: --------------
Coding: 33DF488B232502C9CC1C1269C45A40951009
Shop #: WSC 00046 412 00000
ASAM Dataset: EV_Brake1ESP90iBOSCH 003020
ROD: EV_Brake1ESP90iBOSCH_AU21.rod
VCID: 88197F493306095E537-80DD
No fault code found.
I did contact Rosstech but no joy as of yet.
Cheers Dan