- Joined
- Nov 24, 2010
- Messages
- 15,084
- Reaction score
- 1,131
- Points
- 113
- Location
- Plymouth
- Website
- wheelsnwires.blogspot.com
Its an idea i've been toying with for some time and been working on since Saturday.
Thanks to Byzan for the clocks I can butcher and thanks to TonyA4 for the clocks to test (I've not blown them up yet).
I want to fit facelift clocks to my Pre-facelift car.
There is changes in the cable layout, different plugs and different sensors needed. Forgetting the sensors for now, they can be added later. I made a loom up out of facelift plugs and wires and the sockets from the back of a pre-facelift clock. I got pictures for that, which I will post up later.
I think I got most of it working but I'm stuck on a couple of little bits.
What works:=-
Door sensors. not all but some. thats down to me not wiring them in.
Dash lights. The clocks light up when I turn the light on but they don't when I open the door or turn the key, like pre-facelift lights. Is this correct?
Voltage.
Fuel.
DIS control.
digi displays.
Dimming the display.
Thats all I can test at the moment as I can't start the car to get it up to temp, speed or revs.
What does not work:=-
Its moaning about some sensors, oil, breaks and I think thats it. I can't really tell cause the screen has missing pixels.
The immobilizer, I need to get this removed, codded, changed. I'm not sure what.
Really important, I can't set the time. I push, twist and nothing happens. I think it goes in to a test mode at some point.
Any ideas, pointers, helps or any thing would be great. My main aim is to get it working and the car driving. I will worry about the oil sensors and break sensors at a later date. I think thats the sensors thats missing.
Here is some images (If they don't work, let me know and i'll get some photobucket ones up tomorrow)
Thanks to Byzan for the clocks I can butcher and thanks to TonyA4 for the clocks to test (I've not blown them up yet).
I want to fit facelift clocks to my Pre-facelift car.
There is changes in the cable layout, different plugs and different sensors needed. Forgetting the sensors for now, they can be added later. I made a loom up out of facelift plugs and wires and the sockets from the back of a pre-facelift clock. I got pictures for that, which I will post up later.
I think I got most of it working but I'm stuck on a couple of little bits.
What works:=-
Door sensors. not all but some. thats down to me not wiring them in.
Dash lights. The clocks light up when I turn the light on but they don't when I open the door or turn the key, like pre-facelift lights. Is this correct?
Voltage.
Fuel.
DIS control.
digi displays.
Dimming the display.
Thats all I can test at the moment as I can't start the car to get it up to temp, speed or revs.
What does not work:=-
Its moaning about some sensors, oil, breaks and I think thats it. I can't really tell cause the screen has missing pixels.
The immobilizer, I need to get this removed, codded, changed. I'm not sure what.
Really important, I can't set the time. I push, twist and nothing happens. I think it goes in to a test mode at some point.
Any ideas, pointers, helps or any thing would be great. My main aim is to get it working and the car driving. I will worry about the oil sensors and break sensors at a later date. I think thats the sensors thats missing.
Here is some images (If they don't work, let me know and i'll get some photobucket ones up tomorrow)