8V Rear parking sensors

[Shima11]

Hi everyone! I know this has been discussed a lot around here, but I just can't find anything, so here I make a new thread...
So I recently acquired an OEM kit for rear parking sensors (sensors, pdc module, buzzer, harness) and I was very eager to install it, but I just can't get the hang of it...
The only information I got from the seller is this:
Orange can high please connect to the gateway pin no 18
Brown cable can low please connect to gateway pin no 8
Red cable +12 V ignition
Black cable GNd
I have no idea where or how to access the CAN module, where to mount the buzzer and where to get 12V from. I'm not a car expert so I kinda need "manuals" in order to get things done.
Any help would be very much appreciated.

 

[Shima11]

Hi everyone! I know this has been discussed a lot around here, but I just can't find anything, so here I make a new thread...
So I recently acquired an OEM kit for rear parking sensors (sensors, pdc module, buzzer, harness) and I was very eager to install it, but I just can't get the hang of it...
The only information I got from the seller is this:
Orange can high please connect to the gateway pin no 18
Brown cable can low please connect to gateway pin no 8
Red cable +12 V ignition
Black cable GNd
I have no idea where or how to access the CAN module, where to mount the buzzer and where to get 12V from. I'm not a car expert so I kinda need "manuals" in order to get things done.
Any help would be very much appreciated.

Might be worth mentioning I have a 2014 sportback

 

[northpole]

if you use elsawin (www.superetka.com create a free account and login to the elsawin database) you should be able to find how to connect it up just how it's done in the factory.
Esawin is the electronic workshop manual and that online version is up to date, and free to use.

 

[Shima11]

So I managed to install the sensors and everything, did all the connections and coding, yet for some reason it's not working. There's no beeping and the parking menu in the mmi is greyed out. Anyone happen to know the reason?

 

[q2us3r]

Any errors in the VCDS/ODB11 scan? has the parking module been added to the gateway? (I.e it appears in the scan)