RS/Honeycomb grill for S3

Dan_k1

Dan_k1

New Member
Joined
Jul 17, 2022
Messages
4
Reaction score
0
Points
1
Location
Birmingham
Hi, Is anyone selling an RS grill with quattro lettering and badge holders no ACC for a 2019 S3 Saloon? I am based in the UK. Or anyone know where I can get one from? Under £300. Seen many coming from China on ebay not too sure if they come with quattro lettering and badge holders etc. And if there’s an issue returning will be a headache. I’ve included a picture of an example of the RS grill I am after.
Thanks.
DB4ED06B 440C 47D0 B4DC C6FFD03D1B92
 
I would also love to know which on people have fitted as I'm a bit dubious of risking a chinese special
 
Dan_k1 said:
Hi, Is anyone selling an RS grill with quattro lettering and badge holders no ACC for a 2019 S3 Saloon? I am based in the UK. Or anyone know where I can get one from? Under £300. Seen many coming from China on ebay not too sure if they come with quattro lettering and badge holders etc. And if there’s an issue returning will be a headache. I’ve included a picture of an example of the RS grill I am after.
Thanks.View attachment 256882
Click to expand...
Try dropping ML Performance a message and see what they can do for you, I normally just message them about what I need and they'll take care of everything else
 
calw123 said:
I would also love to know which on people have fitted as I'm a bit dubious of risking a chinese special
Click to expand...
Almost all of them come from China I think, AutoID, Carbon House etc. etc.

EU made ones are probably a tad more expensive!
 
Alexy-63 said:
Almost all of them come from China I think, AutoID, Carbon House etc. etc.

EU made ones are probably a tad more expensive!
Click to expand...
This.

I got mine from AliExpress. It came with the Audi rings (chrome and black) and the quattro lettering. Ask the seller what it comes with before you buy.

The only thing it didn't come with was the S3 badge but you can use your current one. The quality is pretty good considering the price, mines been on 2 years and no issues.
 
I've got one from ebay, I believe it was some chinese seller and it's been on the car for about 4 years, no problems.

One thing to keep in mind if you will be doing this swap is that you may have to trim the foam that sits on the crash bar as the fitment might be tight.

The foam does have some wires and a vacuum line running through which is for crash sensors so be careful when messing with it.

You could remove the foam but you will need to put the crash sensor back in place. I've seen some people run it through the actual crash bar itself although I don't know how much difference it makes.
 
You must log in or register to reply here.
Top
Back