Brilliant, looking forward to updates. Finally managed to squirel enough away to attempt to get mine finished off and back on the road. Work starts 27th Dec. Hoping for 300bhp

Get the mate to pay for it!In the process of refurbing my 2-ton engine crane, I let a mate use it and he ruined it, left it out in the rain for allmost 10 months and it rusted and the ram seal is leaking, wont be letting anyone else use it ever again.
hopefully new swivel caster wheels and ram seal kit will be here in early January, by then i will have repainted it all fresh, not something I planned and ceratinly not what i expected from a mate...![]()

Good afternoon chaps, a bit of an update on this somewhat long-winded project, it's still ongoing and making steady progress.
One area that I wanted to address was the HFC , or more to the point lack of one.
As many of us will know from previous experience the 034 HFC's as well as being overpriced, they do fail quickly, which is a pain in the bum and at MOT time.
After a lot of research and investigation, I've found a company that will supply and fabricate a suitable HFC cat and more appropriate exhaust system for the old bus to match the intended upgrade in line for it.
My most recent conversation with them they were quoting me a 2-week lead time on a complete setup with a DIY fit basis.
Not the cheapest solution but very comparable to a full Milltek system but with a decent spec HFC that will be fine on the omissions side of things
So that's another big box ticked, just need to sell a few more organs to pay for it..lol , and get it ordered of course.
I'm nearly there now and ready to get all these shiny bits fitted now, just need to recover a few more weeks before i can tackle things.![]()
Recommend MRC Tuning near Oxford, full rolling road Tuning, that's where my car was remapped stage 2.Will now have to find a decent tuner to do the remap.
Any recommendations near Guildford?
Hi, Just to jump in, I have the same car and engine, gear box code FUB.Great build Charley.
I am busy with a similar idea and was wondering if you could help out with something. Do you by any chance know which manual transmission the BUL engine uses for the quattro?
Do you know which one you have?

Thanks so much Charlie.Special edition 220's were only supplied in a few combinations.
In Avant quatrro format it was BUL engine with either a GVC or GMV gearbox and either the FUB or HUN rear axle.
In saloon quatrro format , it was BUL engine with GMV gearbox and FUB or HUN rear axle .
In 2wd format BUL and GVC as no rear axle needed.
Not option listed for GVC gearbox in the saloon either 2006 or 2007 model years.
View attachment 279804