After 2 months my stuck on number plate has fallen off - thankfully on my drive. I did use multiple stickers.
I trust drilling/screwing on is optimal and this Audi face plate (photo below) is designed to be drilled.
- I'll start with a small drill bit and make a hole slightly smaller than the plate screws.
Any advice on how to avoid car damage. Any gotcha's with doing this?
I trust drilling/screwing on is optimal and this Audi face plate (photo below) is designed to be drilled.
- I'll start with a small drill bit and make a hole slightly smaller than the plate screws.
Any advice on how to avoid car damage. Any gotcha's with doing this?