2007 A3 2.0 TDI 170, Clutch Switch Location?? Help

[davsmith64]

Hello All,
Ive just fitted Retrofitted Cruise Control Stalk & ECU to my A3.
Coded it all in correctly, In Engine & Steering

However it dont work :/
In VCDS i go to Measuring Block 006 in engine. It shows my brake switch is working, however doesnt register anything on the clutch pedal.
I cant seen to see the clutch swith and I am struggling trying to find any info regarding this.
Can anyone help?
Thanks Dave

 

[davsmith64]

Nobody any ideas?
Thanks Dave

 

[NHN]

Clutch switch would be above the clutch pedal.

 

[davsmith64]

Clutch switch would be above the clutch pedal.

Ive looked above the pedal and cant see it at all. had all the under cover off to look for it.

 

[davsmith64]

Still have this issue? Does anyone know exactly where the clutch switch is?
regards dave

 

[NHN]

Check the brake switch again, the clutch has a hall sender on the back end of the master cylinder, doubt its this, I would join the wires temp on brake switch as sometimes it can register as working, but not be so.

 

[davsmith64]

i will try this tomorrow. Will let you know how it goes.