Good Evening,
I've finally got round to buying a new car which has the CAYC engine fitted. I noticed the other day that the engine was a little lumpy whilst cold and ticking over.
Tonight I've popped out and taken 2 readings:
Readings when cold:
IDE00365-ENG99400 Injection amount deviation cylinder 1-FAC_CYL_BAL1 -0.0255 mg/stroke
IDE00366-ENG101187 Injection amount deviation cylinder 2-FAC_CYL_BAL2 0.1910 mg/stroke
IDE00367-ENG101684 Injection amount deviation cylinder 3-FAC_CYL_BAL3 0.1965 mg/stroke
IDE00368-ENG103465 Injection amount deviation cylinder 4-FAC_CYL_BAL4 -0.3964 mg/stroke
Readings when hot:
IDE00365-ENG99400 Injection amount deviation cylinder 1-FAC_CYL_BAL1 1.1973 mg/stroke
IDE00366-ENG101187 Injection amount deviation cylinder 2-FAC_CYL_BAL2 0.5850 mg/stroke
IDE00367-ENG101684 Injection amount deviation cylinder 3-FAC_CYL_BAL3 -4.0223 mg/stroke
IDE00368-ENG103465 Injection amount deviation cylinder 4-FAC_CYL_BAL4 2.1909 mg/stroke
Is that suggesting that injector 3 is not well?
I've finally got round to buying a new car which has the CAYC engine fitted. I noticed the other day that the engine was a little lumpy whilst cold and ticking over.
Tonight I've popped out and taken 2 readings:
Readings when cold:
IDE00365-ENG99400 Injection amount deviation cylinder 1-FAC_CYL_BAL1 -0.0255 mg/stroke
IDE00366-ENG101187 Injection amount deviation cylinder 2-FAC_CYL_BAL2 0.1910 mg/stroke
IDE00367-ENG101684 Injection amount deviation cylinder 3-FAC_CYL_BAL3 0.1965 mg/stroke
IDE00368-ENG103465 Injection amount deviation cylinder 4-FAC_CYL_BAL4 -0.3964 mg/stroke
Readings when hot:
IDE00365-ENG99400 Injection amount deviation cylinder 1-FAC_CYL_BAL1 1.1973 mg/stroke
IDE00366-ENG101187 Injection amount deviation cylinder 2-FAC_CYL_BAL2 0.5850 mg/stroke
IDE00367-ENG101684 Injection amount deviation cylinder 3-FAC_CYL_BAL3 -4.0223 mg/stroke
IDE00368-ENG103465 Injection amount deviation cylinder 4-FAC_CYL_BAL4 2.1909 mg/stroke
Is that suggesting that injector 3 is not well?
